Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 06 igntim insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

EM-10
                                ENGINE MECHANICAL    -   IGNITION TIMING


                                             IGNITION TIMING                                          EM1L9-01


                                             INSPECTION
                                             1.    REMOVE V-BANK COVER
                                             (a) Using a 5 mm hexagon wrench, remove the 3 cap nuts.
                                             (b) Loosen the V-bank cover fastener counterclockwise.
   5 mm
                                             (c) Remove the V-bank cover.
   Hexagon                                   2.    WARM UP ENGINE
   Wrench                           A10518
                                             Allow the engine to warm up to normal operating temperature.


                       TOYOTA                3.    CONNECT TOYOTA HAND-HELD TESTER OR OBDII
                       Hand-Held Tester            SCAN TOOL
                                             (a)   Connect the TOYOTA hand-held tester or OBDII scan
                                                   tool to the DLC3.
                                             (b)   Please refer to the TOYOTA hand-held tester or OBDII
                                                   scan tool operator's manual for further details.



        DLC3                        A01670



                                             4.  CONNECT TIMING LIGHT TO ENGINE
  Lead Wire
                                             Connect the clip of a timing light to the lead wire as shown.
                                             5.  CHECK IDLE SPEED
                                             (a) Race the engine speed at 2,500 rpm for approx. 90 se-
                                                 conds.
                                             (b) Check the idle speed.
                                                 Idle speed: 700 

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo