Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 08 fcr insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

                                                                                                       SF-85
                                                SFI   -   FUEL CUT RPM


                                          FUEL CUT RPM                                                  SF0JT-03


                                          INSPECTION
                                          1.    REMOVE V-BANK COVER
                                          (a) Using a 5 mm hexagon wrench, remove the 3 cap nuts.
                                          (b) Loosen the V-bank cover fastener counterclockwise.
                                          (c) Remove the V-bank cover.
    5 mm
    Hexagon                               2.    WARM UP ENGINE
    Wrench                       A10518
                                          Allow the engine to warm up to normal operating temperature.


            TOYOTA Hand-Held Tester       3.      CONNECT LEXUS HAND-HELD TESTER OR OBDII
                                                  SCAN TOOL
                                          (a)     Connect the TOYOTA hand-held tester or OBDII scan
                                                  tool to the DLC3.
                                          (b)     Please refer to the TOYOTA hand-held tester or OBDII
                                                  scan tool operator's manual for further details.


        DLC3                     A01670



                                          4.      INSPECT FUEL CUT OFF PRM
                                          (a)     Increase the engine speed to at least 3,500 rpm.
                Sound Scope               (b)     Use a sound scope to check for injector operating noise.
                                          (c)     Check that when the throttle lever is released, injector op-
                                                  eration noise stops momentarily and then resumes.
                                          HINT:
                                          Measure with the A/C OFF.
                                                Fuel return rpm: 1,200 rpm
                                 B06523   5.    DISCONNECT LEXUS HAND-HELD TESTER OR
                                                OBDII SCAN TOOL
                                          6.    REINSTALL V-BANK COVER
                                          (a) Using 5 mm hexagon wrench, install the V-bank cover
                                                with the 3 cap nuts.
                                          (b) Press down the V-bank cover fastener.




2001 SIENNA (RM787U)

                                                                Author :           Date :               1160

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo