Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 08 inje ovi

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download ovi documenatation <<

Text preview - extract from the document

                                                                                                  SF-21
                                              SFI   -   INJECTOR


                                        INJECTOR                                                   SF0IN-03


                                        ON-VEHICLE INSPECTION
                                        1.      REMOVE V-BANK COVER
                                        (a)     Using a 5 mm hexagon wrench, remove the 3 cap nuts.
                                        (b)     Loosen the V-bank cover fastener counterclockwise.
                                        (c)     Remove the V-bank cover.

                               B12669



                                        2.     INSPECT INJECTOR OPERATION
                                        Check operation sound from each injector.
                                               (1) With the engine running or cranking, use a sound
                                                      scope to check that there is normal operating noise
                                                      in proportion to engine speed.
                                               (2) If you have no sound scope, you can check the in-
                                                      jector operating vibration with your finger.
                       Sound Scope
                                        If no sound or unusual sound is heard, check the wiring connec-
                               B00720   tor, injector or injection signal from the ECM.

                                        3.     INSPECT INJECTOR RESISTANCE
 Ohmmeter
                                        (a)    Disconnect the injector connector.
                                        (b)    Using an ohmmeter, measure the resistance between the
                                               terminals.
                                               Resistance: 13.4 - 14.2  at 20

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo