Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 01 repins vlasl
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download vlasl documenatation <<
Text preview - extract from the document
IN-8
INTRODUCTION - REPAIR INSTRUCTIONS
IN0CP-17
VEHICLE LIFT AND SUPPORT LOCATIONS
Front
JACK POSITION
Front Front crossmember
Rear Rear axle beam
CAUTION : When jacking-up the front and rear, make sure the car is
not carrying any extra weight.
NOTICE :
Do not jack up at the center of the rear axle beam. If the vehicle is lifted
at the center of the rear axle beam, the rear axle beam will be damaged.
PANTOGRAPH JACK POSITION
SUPPORT POSITION
Safety stand and swing arm type lift
B01552
2001 SIENNA (RM787U)
Author : Date : 8
IN-9
INTRODUCTION - REPAIR INSTRUCTIONS
Plate type lift
L
B
Attachment
A C
NOTICE :
Set the rear side attachment so that it is behind the parting line between
front door and sliding door.
HINT :
Left and right set position Place the vehicle over the center of the lift.
Front and rear set position D Align the cushion gum ends of the plate
with the attachment lower ends (A, C).
D Align the attachment upper end (B) with the
front jack supporting point (L).
Attachment dimensions
85 mm (3.35 in.)
70 mm (2.76 in.)
100 mm (3.94 in.)
200 mm (7.87 in.)
B01553
2001 SIENNA (RM787U)
Author : Date : 9
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo