Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 02 chas insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

                                                                                            MA-7
                         MAINTENANCE     -   CHASSIS


                                CHASSIS                                                      MA011-01


                                INSPECTION
                                1.  INSPECT STEERING LINKAGE
                                (a) Check the steering wheel freeplay (See page SR-8 ).
                                (b) Check the steering linkage for looseness or damage.
                                    Check that:
                                            S    Tie rod ends do not have excessive play.
                                            S    Dust seals and boots are not damaged.
                                            S    Boot clamps are not loose.
                                2.  INSPECT SRS AIRBAG (See pages RS-14 , RS-28 )
                                3.  INSPECT STEERING GEAR HOUSING OIL
                                Check the steering gear housing for oil leakage.
                                4.  INSPECT DRIVE SHAFT BOOTS
                                Check the drive shaft boots for clamp looseness, leakage or
                                damage.




                                5.     INSPECT BALL JOINTS AND DUST COVERS
                                (a)    Inspect the ball joints for excessive looseness.
                                        S    Jack up the front of the vehicle and place wooden
                                             blocks with a height of 180-200 mm (7.09-7.87 in.)
                                             under the front tires.
                                        S    Lower the jack until there is about half a load on the
                                             front coil spring. Place stands under the vehicle for
                                             safety.
                       B00853           S    Check that the front wheels are pointing straight
                                             ahead, and block them with chocks.
                                        S    Using a lever, pry up the end of the lower arm, and
                                             check the amount of play.
                                       Maximum ball joint vertical play: 0 mm (0 in.)
                                If there is play, replace the ball joint.
                                (b) Check the dust cover for damage.




                       B00854



                                6.     CHECK TRANSAXLE FLUID
                                Visually check the transaxle for fluid leakage.
                                If leakage is found, check for the cause and repair.
                                7.     REPLACE TRANSAXLE FLUID (See page DI-157 )




2001 SIENNA (RM787U)

                                                  Author :              Date :                50

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo