Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 14 tccadp insp
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download insp documenatation <<
Text preview - extract from the document
AX-31
AUTOMATIC TRANSAXLE - TORQUE CONVERTER CLUTCH AND DRIVE PLATE
SST TORQUE CONVERTER CLUTCH
AND DRIVE PLATE AX04I-01
INSPECTION
1. INSPECT ONE-WAY CLUTCH
(a) Install SST into the inner race of the one-way clutch.
SST 09350-32014 (09351-32010)
(b) Install SST so that it fits in the notch of the converter hub
AT0953
and outer race of the one-way clutch.
SST 09350-32014 (09351-32020)
(c) With the torque converter clutch setting up on its side,
Hold check that the clutch locks when turned counterclock-
wise, and rotates smoothly clockwise.
If necessary, clean the converter and retest the clutch.
Lock Replace the converter if the clutch still fails the test.
Free
Turn
AT3306
2. MEASURE DRIVE PLATE RUNOUT AND INSPECT
RING GEAR
(a) Set up a dial indicator and measure the drive plate runout.
(b) Check the damage of the ring gear.
Maximum runout: 0.20 mm (0.0079 in.)
If the runout is not within the specification or ring gear is dam-
aged, replace the drive plate.
Torque: 83 N◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo