Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 15 fwa insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

SA-4
                           SUSPENSION AND AXLE         -      FRONT WHEEL ALIGNMENT


 Front
                                           FRONT WHEEL ALIGNMENT                                                               SA0QQ-01


                                           INSPECTION
                                           1.       MEASURE VEHICLE HEIGHT
                                                     Tire size                  Front*1 mm (in.)             Rear*2   mm (in.)
                                                    205/70R15                      230 (9.06)                   324 (12.76)
                                                    215/65R15                      226 (8.90)                   320 (12.60)
                                           *1:  Front measuring point
                                  F02244
                                           Measure from the ground to the center of the front side lower
                                           suspension arm mounting bolt.
 Rear                                      *2: Rear measuring point
                                           Measure from the ground to the center of the axle beam bush-
                                           ing.
                                           NOTICE:
                                           Before inspecting the wheel alignment, adjust the vehicle
                                           height to the specification.
                                           If the vehicle height is not within the specification, try to adjust
                                           it by pushing down on or lifting the body.
                                  F02258



                                           2.    INSTALL CAMBER- CASTER- KINGPIN GAUGE
                                                 ONTO VEHICLE OR POSITION VEHICLE ON WHEEL
                                                 ALIGNMENT TESTER
                                           Follow the specific instructions of the equipment manufacturer.
                                           3.    INSPECT CAMBER, CASTER AND STEERING AXIS
                                                 INCLINATION
                                           Camber                                               -0 

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo