Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 15 fds disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download disa documenatation <<

Text preview - extract from the document

SA-18
                       SUSPENSION AND AXLE    -   FRONT DRIVE SHAFT
                                                                                                 SA07J-02


                                      DISASSEMBLY
                                      1.    CHECK DRIVE SHAFT
                                      (a)   Check to see that there is no play in the outboard joint
                                            shaft.
                                      (b)   Check to see that the inboard joint shaft slides smoothly
                                            in the thrust direction.
                                      (c)   Check to see that there is no remarkable play in the radial
                                            direction of the inboard joint shaft.
                             R14967
                                      (d)   Check for damage to boots.
                                      2.    REMOVE INBOARD AND OUTBOARD JOINT BOOT
                                            CLAMPS
                                      (a)   Using pliers, draw the hooks together and remove the
                                            large inboard joint boot clamp.
                                      (b)   Using a side cutter, cut the small inboard and 2 outboard
                                            joint boot clamps and remove them.




                                      3.    REMOVE INBOARD JOINT SHAFT FROM OUTBOARD
                                            JOINT SHAFT
                                      (a) Place matchmarks on the inboard and outboard joint
                                            shafts.
                                      NOTICE:
                                      Do not punch the marks.
                                      (b) Using a snap ring expander, pull out the outboard joint
    matchmarks                              shaft with expanding the snap ring.
                             W03190   4.    REMOVE INBOARD AND OUTBOARD JOINT BOOTS
                                      Slide out the 2 boots.
                                      5.    REMOVE DUST COVER
                                      (a) LH drive shaft:
                                            Using a screwdriver and hammer, remove the dust cover
                                            from the inboard joint shaft.
                                      (b) RH drive shaft:
                                            Using a press, remove the dust cover from the inboard
                                            joint shaft.

                             SA0689



                                      6.    RH DRIVE SHAFT:
                                            DISASSEMBLE INBOARD JOINT SHAFT
                                      (a)   Using SST and a press, remove the dust cover.
                       SST                  SST 09950-00020
                                      (b)   Using a snap ring expander, remove the snap ring.




                             R09717



2001 SIENNA (RM787U)

                                                         Author :             Date :               1305
                                                                                       SA-19
                       SUSPENSION AND AXLE   -   FRONT DRIVE SHAFT

                                     (c)  Using a press, remove the bearing.
                                     (d)  Remove the snap ring.
                                     7.   REMOVE NO.2 DUST DEFLECTOR
                                     (a)  Mount outboard joint shaft in a soft jaw vise.
                                     (b)  Using a screwdriver and hammer, remove the No.2 dust
                                          deflector.
                                     NOTICE:
                                     Be careful not to damage the ABS speed sensor rotor.
                            SA1451




2001 SIENNA (RM787U)

                                                       Author :        Date :            1306

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo