Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 15 fsa reas

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download reas documenatation <<

Text preview - extract from the document

                                                                                                  SA-29
                       SUSPENSION AND AXLE     -   FRONT SHOCK ABSORBER
                                                                                                   SA07R-03


                                      REASSEMBLY
                                      1.    INSTALL LOWER INSULATOR ONTO SHOCK AB-
                                            SORBER
                                      2.    INSTALL SPRING BUMPER TO PISTON ROD




                                      3.   INSTALL COIL SPRING
   SST                                (a)  Using SST, compress the coil spring.
                                           SST 09727-30021
                                      NOTICE:
                                      Do not use an impact wrench. It will damage the SST.




                             F02221



                                      (b) Install the coil spring to the shock absorber.
                                      HINT:
                                      Fit the lower end of the coil spring into the gap of the spring low-
                                      er seat.
                                      4.     INSTALL UPPER INSULATOR AND SPRING UPPER
                                             SEAT
                                      (a) Align the 'OUT' mark of spring upper seat with the mark
                                             of the upper insulator.
                             F06544   (b) Install the spring upper seat with upper insulator to the
                                             shock absorber with the mark facing to the outside of the
                                             vehicle.
                                      (c) Install the bearing dust cover, strut thrust bearing and
                                             suspension support.




                                      (d)  Using SST to hold the suspension support, install a new
                       SST
                                           nut.
                                           SST 09729-22031
                                           Torque: 49 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo