Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 15 taw insp
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download insp documenatation <<
Text preview - extract from the document
SA-2
SUSPENSION AND AXLE - TIRE AND WHEEL
TIRE AND WHEEL SA078-05
INSPECTION
1. INSPECT TIRE
(a) Check the tires for wear and proper inflation pressure.
Cold inflation pressure:
Normal driving:
Front, Rear
Tire size
R03031 kPa (kgf/cm2, psi)
P205/70R15 95S 240 (2.4, 35)
220 (2.2, 32)*1
P215/65R15 95S
240 (2.4, 35)*2
*1: Vehicle load up to 6 passengers
*2: Up to vehicle capacity weight
Trailer towing:
Front, Rear
Tire size
kPa (kgf/cm2, psi)
P205/70R15 95S 240 (2.4, 35)
P215/65R15 95S 240 (2.4, 35)
(b) Check the tire runout.
Tire runout: 1.0 mm (0.039 in.) or less
2. ROTATING TIRES
HINT:
Front S See the illustration for where to rotate each tire.
S If the vehicle is equipped with compact spare tire, exclude
it from the rotational combination.
It is necessary to perform the initial setting of the tire pressure
warning system when tire and wheel have been replaced or tire
rotation has been done (See page DI-209 ).
F02256
3. INSPECT WHEEL BALANCE
(a) Check and adjust the Off-the-car balance.
(b) If necessary, check and adjust the On-the-car balance.
Imbalance after adjustment: 8.0 g (0.018 lb) or less
R07928
2001 SIENNA (RM787U)
Author : Date : 1289
SA-3
SUSPENSION AND AXLE - TIRE AND WHEEL
4. CHECK WHEEL BEARING LOOSENESS
(a) Check the backlash in the bearing shaft direction.
Maximum: 0.05 mm (0.0020 in.)
(b) Check the axle hub deviation.
Maximum: 0.05 mm (0.0020 in.)
5. CHECK FRONT SUSPENSION FOR LOOSENESS
6. CHECK STEERING LINKAGE FOR LOOSENESS
7. CHECK BALL JOINT FOR LOOSENESS
F02203 8. CHECK SHOCK ABSORBER WORKS PROPERLY
S Check that oil leaks
S Check mounting bushings for wear
S Check front and rear of the vehicle for bounce
2001 SIENNA (RM787U)
Author : Date : 1290
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo