Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 16 fbc disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download disa documenatation <<

Text preview - extract from the document

BR-30
                                 BRAKE   -   FRONT BRAKE CALIPER
                                                                                           BR0IQ-05


                                DISASSEMBLY
                                1.   REMOVE CYLINDER BOOT SET RING AND
                                     CYLINDER BOOT
                                Using a screwdriver, remove the cylinder boot set ring and cylin-
                                der boot.



                       R03769



                                2.   REMOVE PISTON FROM CYLINDER
                                (a)  Put a piece of cloth or equivalent between the piston and
                                     the caliper.
                                (b) Use compressed air to remove the piston from the cylin-
                                     der.
                                CAUTION:
                                Do not place your fingers in front of the piston when using
                                compressed air.
                       R03768



                                3.    REMOVE PISTON SEAL FROM CYLINDER
                                Using a screwdriver, remove the piston seal.
                                4.    REMOVE SLIDING PINS AND DUST BOOTS
                                (a) Remove the 2 sliding pins from the torque plate.
                                NOTICE:
                                At the time of reassembly, please refer to the following
                                item.
                                Insert the sliding pin with sliding bushing into the lower
                       R03835   part, and insert the sliding pin without sliding bushing into
                                the upper part.
                                (b) Using a screwdriver and hammer, tap out the 2 dust
                                      boots.
                                HINT:
                                At the time of reassembly, please refer to the following item.
                                Using a 24 mm socket and hammer, tap in the 2 new dust boots.
                                NOTICE:
                                At the time of reassembly, please refer to the following
                                item.
                       F13338   Confirm that the metal plate portion of the dust boot fits
                                snugly in the torque plate.




2001 SIENNA (RM787U)

                                                   Author :             Date :               1373

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo