Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 16 fbc insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

                                                                                            BR-31
                                BRAKE    -   FRONT BRAKE CALIPER
                                                                                             BR0IR-05


                                INSPECTION
                                1.   MEASURE PAD LINING THICKNESS
                                Using a ruler, measure the pad lining thickness.
                                     Standard thickness: 11.0 mm (0.433 in.)
                                     Minimum thickness: 1.0 mm (0.039 in.)
                                Replace the pad if the pad's thickness is at the minimum thick-
                                ness or less, or if the pad has severe, uneven wear.

                       F06935



                                2.    MEASURE DISC THICKNESS
                                Using a micrometer, measure the disc thickness.
                                      Standard thickness: 28.0 mm (1.102 in.)
                                      Minimum thickness: 26.0 mm (1.024 in.)
                                Replace the disc if the thickness of the disc is at the minimum
                                thickness or less. Replace the disc or grind it on a lathe if it is
                                scored or is worn unevenly.

                       R02878



                                3.     MEASURE DISC RUNOUT
                                Using a dial indicator, measure the disc runout at a position 10
                                mm (0.39 in.) from the outside edge.
                                       Maximum disc runout: 0.05 mm (0.0020 in.)
                                If the disc's runout is at the maximum value or greater, check the
                                bearing play in the axial direction and check the axle hub runout
                                (See page SA-9 ). If the bearing play and axle hub runout are
                                not abnormal, adjust the disc runout or grind it on a "On-Car"
                       F13339   brake lathe.

                                4.    IF NECESSARY, ADJUST DISC RUNOUT
                                (a)   Remove the 2 bolts and torque plate from the knuckle.
                                (b)   Remove the hub nuts and the disc. Reinstall the disc 1/5
                                      of a turn round from its original position on the hub. Install
                                      and torque the hub nuts.
                                      Torque: 104 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo