Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 17 psg reas
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download reas documenatation <<
Text preview - extract from the document
SR-46
STEERING - POWER STEERING GEAR
SR1D3-01
REASSEMBLY
NOTICE:
Press When using a vise, do not overtighten it.
1. COAT PARTS INDICATED BY ARROWS WITH POWER
STEERING FLUID OR MOLYBDENUM DISULFIDE
SST LITHIUM BASE GREASE (See page SR-34 )
2. INSTALL OIL SEAL
(a) Coat a new oil seal lip with power steering fluid.
(b) Using SST, press in the oil seal.
SST 09950-60010 (09951-00240, 09951-00430,
09952-06010), 09950-70010 (09951-07360)
NOTICE:
S Make sure that the oil seal is installed facing in the
correct direction.
S Take care that the oil seal does not get reversed as
SST you install it.
Oil Seal
W03561
3. INSTALL STEERING RACK
(a) Install SST to the steering rack.
SST 09631-33010
HINT:
If necessary, scrape the burrs off the rack teeth end and bur-
nish.
(b) Coat the SST with power steering fluid.
(c) Install the rack into the rack housing.
Rack Teeth End
NOTICE:
Be careful not to damage the oil seal lip.
(d) Remove SST.
SST SST 09631-33010
W02101
2001 SIENNA (RM787U)
Author : Date : 1442
SR-47
STEERING - POWER STEERING GEAR
4. INSTALL BUSHING
(a) Coat a new O-ring with power steering fluid and install it
to the bushing.
(b) To prevent oil seal lip damage, wind vinyl tape on the
steering rack end, and apply power steering fluid.
(c) Install the bushing.
NOTICE:
Vinyl Tape S Make sure that the bushing is installed facing in the
R11574 correct direction.
S Be careful not to damage the oil seal lip.
5. INSTALL CYLINDER END STOPPER
SST (a) Align the installation hole for the wire of the cylinder end
Wire
stopper with the slot of the rack housing.
(b) Install a new wire into the cylinder end stopper.
(c) Using SST, turn the cylinder end stopper clockwise 450
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo