Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 17 psvp reas

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download reas documenatation <<

Text preview - extract from the document

SR-30
                                            STEERING   -   POWER STEERING VANE PUMP
                                                                                                         SR062-05


                                             REASSEMBLY
                                             NOTICE:
                                             When using a vise, do not overtighten it.
                                             1.   COAT PARTS INDICATED BY ARROWS WITH POWER
                                                  STEERING FLUID (See page SR-22 )
                                             2.   INSTALL VANE PUMP SHAFT
                                             3.   INSTALL STRAIGHT PINS
                                             Using a plastic hammer, tap in 2 new straight pins.
                                             NOTICE:
                                             Be careful not to damage the straight pins.




                                             4.    INSTALL CAM RING
                       Inscribed Mark        Align the holes of the cam ring and 2 straight pins, and install
                                             the cam ring with the inscribed mark facing outward.
                                             5.    INSTALL VANE PUMP ROTOR
                                             (a) Install the vane pump rotor with the inscribed mark facing
                                                   outward.
                                             (b) Install a new snap ring to the vane pump shaft.

                                   R13458




                 Round End                   6.     INSTALL 10 VANE PLATES
                                             Install the 10 vane plates with the round end facing outward.
                                             7.     INSTALL GASKET
                                             Install a new gasket.
                                             8.     INSTALL SIDE PLATE
                                             Align the holes of the side plate and 2 straight pins and install
                                             the side plate.

                                   R01149



                                             9.     INSTALL WAVE WASHER
                                             Install the wave washer so that its protrusions fit into the slots
                                             in the side plate.
                                             10. INSTALL REAR HOUSING
                                             (a) Coat 2 new O-rings with power steering fluid and install
                                                    them to the rear housing.
                                             (b) Install the rear housing with the 4 bolts.
                                                    Torque: 17 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo