Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 17 tsc disa
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download disa documenatation <<Text preview - extract from the documentSR-14
STEERING - TILT STEERING COLUMN
SR0D9-02
DISASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
1. REMOVE IGNITION KEY CYLINDER ILLUMINATION
2. REMOVE COLUMN UPPER BRACKET AND COLUMN
UPPER CLAMP
Screw
Extractor
(a) Using a centering punch, mark the center of the 2 ta-
pered-head bolts.
(b) Using a 3 - 4 mm (0.12 - 0.16 in.) drill, drill into the 2 bolts.
(c) Using a screw extractor, remove the 2 bolts, column up-
per bracket and column upper clamp.
3. REMOVE SHIFT LEVER
F02581 Remove the screw and shift lever.
4. REMOVE SHIFT LEVER HOUSING
Remove the 3 torx screws and shift lever housing.
5. REMOVE PARK LOCK CABLE (See page AX-19 )
6. REMOVE RELEASE LEVER SPRING
7. REMOVE TURN SIGNAL BRACKET
Remove the 2 torx screws and turn signal bracket.
F03679
Plate Washer A 8. REMOVE STEERING COLUMN HOUSING WITH MAIN
SHAFT ASSEMBLY
(a) Set SST, plate washer (18 and 36 mm outer diameter) and
Screw screw (4.0 mm diameter, 0.7 mm pitch, 15.0 mm length),
SST as shown in the illustration.
And then remove the 2 pivot pins.
SST 09910-00015 (09911-0001 1, 09912-00010)
Reference
Plate Washer B F03680 Plate washer A (18 mm): 90562 - 04012
Plate washer B (36 mm): 90201 - 10201
Screw: 90154 - 40015
(b) Remove the steering column housing with the main shaft
assembly from the column tube assembly.
NOTICE:
Do not bend the universal joint of the main shaft assembly
more than 20
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo