Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 17 tsc remo
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download remo documenatation <<
Text preview - extract from the document
SR-1 1
STEERING - TILT STEERING COLUMN
SR0D8-03
REMOVAL
1. REMOVE STEREO COMPONENT CONTROLLER AS-
SEMBLY
Remove the stereo component controller assembly.
2. REMOVE STEERING WHEEL PAD
NOTICE:
If the airbag connector is disconnected with the ignition
switch at ON or ACC, DTCs will be recorded.
Torx Screw Screw Case (a) Place the front wheels facing straight ahead.
(b) Using a torx socket wrench, loosen the 2 torx screws until
the groove along the screw circumference catches on the
screw case.
F02576
(c) Pull out the wheel pad from the steering wheel and dis-
Airbag Connector
connect the airbag connector.
CAUTION:
S When storing the wheel pad, keep the upper surface
of the pad facing upward.
S Never disassemble the wheel pad.
NOTICE:
When removing the wheel pad, take care not to pull the air-
bag wire harness.
Correct Wrong
F02578
3. REMOVE STEERING WHEEL
Matchmarks
(a) Disconnect the connector.
(b) Remove the steering wheel set nut.
(c) Place matchmarks on the steering wheel and main shaft
assembly.
(d) Using SST, remove the steering wheel.
SST 09950-50012 (09951-05010, 09952-05010,
09953-05020, 09954-05020)
SST F02579 4. REMOVE FRONT DOOR INSIDE SCUFF PLATE
2001 SIENNA (RM787U)
Author : Date : 1407
SR-12
STEERING - TILT STEERING COLUMN
5. REMOVE COWL SIDE TRIM
Remove the clip and cowl side trim.
6. REMOVE LOWER LH FINISH PANEL
(a) Remove the 2 screws and disconnect the hood lock con-
trol lever.
(b) Remove the 2 bolts and lower LH finish panel.
(c) Disconnect the connector.
7. REMOVE LH LOWER INSTRUMENT PANEL
(a) Disconnect the connectors.
(b) Remove the 2 bolts and LH lower instrument panel.
8. REMOVE UPPER AND LOWER COLUMN COVERS
(a) Remove the lower No. 2 cover from the lower column cov-
er.
(b) Remove the 3 screws, upper and lower column covers.
9. REMOVE COMBINATION SWITCH WITH SPIRAL
CABLE
(a) Disconnect the 5 connectors.
(b) Disconnect the airbag connector.
(c) Remove the 3 screws and combination switch with spiral
cable.
10. REMOVE SPIRAL CABLE (See page BE-17 )
NOTICE:
Do not disassemble the spiral cable or apply oil to it.
11. DISCONNECT INTERMEDIATE SHAFT ASSEMBLY
(a) Place matchmarks on the intermediate shaft assembly
and control valve shaft.
(b) Remove the bolt and disconnect the intermediate shaft
assembly.
Matchmarks
F02580
12. DISCONNECT TRANSMISSION CONTROL CABLE
ASSEMBLY
Disconnect the transmission control cable assembly from the
column shift lever assembly.
13. REMOVE INTERMEDIATE SHAFT ASSEMBLY
Remove the bolt and intermediate shaft assembly.
F03713
2001 SIENNA (RM787U)
Author : Date : 1408
SR-13
STEERING - TILT STEERING COLUMN
14. REMOVE STEERING COLUMN ASSEMBLY
(a) Loosen the clamp bolt.
(b) Disconnect the connectors.
(c) Remove the return spring.
(d) Remove the 4 column assembly set nuts and steering col-
umn assembly.
F00867
2001 SIENNA (RM787U)
Author : Date : 1409
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo