Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 17 tsc reas

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download reas documenatation <<

Text preview - extract from the document

SR-18
                                      STEERING   -   TILT STEERING COLUMN
                                                                                                   SR0DB-02


                                       REASSEMBLY
                                       NOTICE:
                                       When using a vise, do not overtighten it.
                                       1.     COAT WITH MOLYBDENUM DISULFIDE LITHIUM
                                              BASE GREASE (See page SR-9 )
                                       2.     INSTALL TILT LEVER
                                       Install the tilt lever with the tilt lever lock shaft.



                                       3.    INSTALL MAIN SHAFT ASSEMBLY
             Washer    SST
                                       (a)   Install the inner race, upper bearing inner race seat, com-
                                             pression spring and spring retainer.
                                       (b) Install a new retaining ring to the main shaft assembly.
                                       (c) Install the washer of SST to the main shaft assembly.
                                       (d) Install SST to the main shaft assembly, as shown in the
                                             illustration.
Retaining Ring                               SST 09612-07010
                             R12807    (e) Using SST, push down the retaining ring until it fits into the
                                             shaft groove.
                                       NOTICE:
                                       Do not bend the universal joint of the main shaft assembly
                                       more than 20

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo