Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 18 asa remo
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download remo documenatation <<
Text preview - extract from the document
RS-52
SUPPLEMENTAL RESTRAINT SYSTEM - AIRBAG SENSOR ASSEMBLY
RS01H-08
REMOVAL
NOTICE:
Do not open the cover or the case of the ECU and electrical
device unless absolutely necessary.
(If the IC terminals are touched, the IC may be destroyed by
static electricity.)
1. REMOVE THESE PARTS:
(See page BO-101 )
(a) Front door scuff plates
(b) Cowl side boards
(c) No.2 finish panel
(d) Glove compartment
(e) Glove compartment door finish plate
(f) Lower finish panel
(g) No.1 safety pad insert
(h) Center cluster finish panel
(i) Front ash receptacle box
(j) Front ash receptacle retainer
(k) Radio assembly
(l) Lower center cluster finish panel
2. REMOVE AIRBAG SENSOR ASSEMBLY
(a) Disconnect the 3 airbag sensor assembly connectors.
NOTICE:
Remove the connectors with the sensor assembly
installed.
(b) Using a torx wrench, remove the 3 screws and airbag sen-
sor assembly.
Torx wrench: T40 (Part No.09042-00020 or locally
H02718 manufactured tool)
2001 SIENNA (RM787U)
Author : Date : 1502
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo