Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 19 gdosy insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

                                                                                           BE-147
                       BODY ELECTRICAL    -   GARAGE DOOR OPENER SYSTEM
                                                                                             BE0G5-05


                                  INSPECTION
                                  1.   INSPECT GARAGE DOOR OPENER SWITCH
                                  Press the switch and check that each LED (red) lights up.
                                  Even if only one switch is found not to light up, replace it.




                         I19482



                                  2.    INSPECT GARAGE DOOR OPENER REGISTRATION
                                        AND TRANSMITTING
                                  HINT:
                                  Use the home link tester made by KENT MORE for this test.
                                  As it is necessary to record the code of the hand held transmit-
                                  ter, customer's code will be erased. When the inspection com-
                                  pletes, please register the customer's again.
                                  (a) Check that the code of hand held transmitter for inspec-
                         I19483          tion can be recorded (See page BE-142 ).
                                  If the code can not be registered, replace garage door opener.




                                  (b)    Press the switch which an inspection code has been reg-
                                         istered for and check that LED (green) of the home link
                                         tester lights up.
                                  If the LED (green) does not light up, replace the garage door
                                  opener.




                         I19484



2001 SIENNA (RM787U)

                                                    Author :             Date :              1665
BE-148
                                   BODY ELECTRICAL       -    GARAGE DOOR OPENER SYSTEM


Wire Harness Side                              3.   INSPECT GARAGE DOOR OPENER SWITCH CIRCUIT
                                               Disconnect the connector from the switch and inspect the con-
                                               nector on the wire harness side, as shown.




                                      I04194




             Tester connection                    Condition                                   Specified condition
1 - Ground                       Constant                                      Continuity
2 - Ground                       Constant                                      Battery positive voltage
                                               If the circuit is not as specified, inspect the power source or wire
                                               harness.




2001 SIENNA (RM787U)

                                                                    Author :                     Date :             1666

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo