Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 19 hatsy adju

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download adju documenatation <<

Text preview - extract from the document

                                                          BE-23
BODY ELECTRICAL   -   HEADLIGHT AND TAILLIGHT SYSTEM
                                                          BE103-04


        ADJUSTMENT
           For Adjustment
           in Vertical Direction




                                                            I02698




                            Author :             Date :    1541
BE-24
                                    BODY ELECTRICAL   -   HEADLIGHT AND TAILLIGHT SYSTEM

1.    ADJUST HEADLIGHT AIM ONLY
(a)   Place the vehicle in the following conditions.
       S   The area around the headlight is not deformed.
       S   The vehicle is parked on a level surface.
       S   Tire inflation pressure is the specified value.
       S   A driver is in the driver's seat and the vehicle is in a state ready for driving (with a tank full).
       S   The vehicle has been bounced several times.
(b)   Check the headlight aiming.
      (1) Prepare a thick white paper.
      (2) Stand the paper perpendicular to the ground at the position 9.84 ft away from the headlights.
      (3) Ensure that the center line of the vehicle and the paper face forms a 90-degree angle as shown
           in the illustration.
      (4) Draw a horizontal line (H line) on the paper, showing where the headlights should strike.
      (5) Draw a vertical line (V line) to where the center line of the vehicle is to be.
      (6) Draw 2 vertical lines to where the both headlights should strike (V RH and V LH lines).
      (7) Draw a horizontal line (by connecting the both low beam center marks) to where the headlights
           should strike (H RH and H LH lines).
HINT:
The H RH and H LH line is 0.4

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo