Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 19 wdlcs insp
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download insp documenatation <<
Text preview - extract from the document
BE-85
BODY ELECTRICAL - WIRELESS DOOR LOCK CONTROL SYSTEM
BE1ZM-01
INSPECTION
1. INSPECT WIRELESS DOOR LOCK TRANSMITTER
OPERATION
HINT:
Refer to "Wireless door lock control receiver and transmitter re-
placement".
(a) Using a screwdriver, remove the cover.
(b) Remove the battery (lithium battery).
Dry cell battery (1.5 V x 2)
(c) Install a new or normal battery (lithium battery).
HINT:
When a new or normal battery can not be obtained, connect 2
new 1.5 V batteries in series, connect the battery (+) to the bat-
tery receptacle side terminal and battery (-) to the bottom termi-
nal, then apply 3 V voltage to the transmitter.
(d) In the location where is approx. 1 M away from driver's
outside handle in the right direction check the transmitter
Push operation when pressing transmission switch on the side
I09405
of the transmitter body.
Standard:
Remote control of vehicle door lock can be operated.
HINT:
S The minimum operation distance differs according to op-
erator, the way of holding, and location.
S As weak wave is used, operation distance might be short-
ened when noise is detected in strong wave or used fre-
quency.
(e) Install the battery (lithium battery).
(f) Install a cover so that O-ring is not distorted or slipped off.
2001 SIENNA (RM787U)
Author : Date : 1603
BE-86
BODY ELECTRICAL - WIRELESS DOOR LOCK CONTROL SYSTEM
2. CHECK BATTERY CAPACITY
HINT:
S Make sure to use the TOYOTA electrical tester.
S With the battery unloaded, judge can not be made wheth-
er the battery is available or not on the test.
S When the transmitter is faulty, the energy amount left in
the battery might not be checked correctly.
S On the lithium battery used for the transmitter, the voltage
more than 2.5 V with the battery unloaded is shown on the
tester until the energy is completely consumed.
Accordingly when inspecting the energy amount left in the
battery, it is necessary to measure the voltage when the
battery is loaded. (1.2 k).
(a) Remove the cover using a (-) driver.
(b) Remove the battery (lithium battery) from the transmitter.
(-) terminal
(c) Connect the lead to the (-) terminal of the transmitter and
install the battery.
I09406
(d) Connect the (+) tester to the (+) battery (lithium battery),
and (-) tester to the lead respectively.
(e) Press one of the transmitting switches on the transmitter
for approx. 1 second.
(f) Press the transmitting switch on the transmitter again to
check the voltage.
Standard: 2.1 V or more
(+) terminal
I09407
2001 SIENNA (RM787U)
Author : Date : 1604
BE-87
BODY ELECTRICAL - WIRELESS DOOR LOCK CONTROL SYSTEM
HINT:
S When the temperature of the battery is low, the judge can
not be made correctly.
When the outcome of the test is less than 2.1 V, conduct
the test again after leaving the battery in the place at 18
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo