Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 10 oilpum inst
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download inst documenatation <<
Text preview - extract from the document
LU-16
LUBRICATION - OIL PUMP
LU0IC-02
INSTALLATION
1. INSTALL OIL PUMP
(a) Remove any old packing (FIPG) material and be careful
not to drop any oil on the contact surfaces of the oil pump
and cylinder block.
S Using a razor blade and gasket scraper, remove all
the old packing (FIPG) material from the gasket sur-
faces and sealing grooves.
S Thoroughly clean all components to remove all the
loose material.
S Using a non-residue solvent, clean both sealing
surfaces.
(b) Apply seal packing to the oil pump as shown in the illustra-
tion.
B Seal packing: Part No. 08826-00080 or equivalent
S Install a nozzle that has been cut to a 2 - 3 mm (0.08
- 0.12 in.) opening.
A
HINT:
Avoid applying an excessive amount to the surface.
S Parts must be assembled within 3 minutes of ap-
C plication. Otherwise the material must be removed
and reapplied.
S Immediately remove nozzle from the tube and rein-
A stall cap.
B Seal Width
2 - 3 mm
C
B04145
(c) Place a new O-ring on the cylinder block.
New O-Ring
P18779
2001 SIENNA (RM787U)
Author : Date : 1206
LU-17
LUBRICATION - OIL PUMP
(d) Engage the spline teeth of the oil pump drive gear with the
large teeth of the crankshaft, and slide the oil pump on the
crankshaft.
(e) Install the oil pump with the 9 bolts. Uniformly tighten the
bolts in several passes.
Torque:
10 mm head: 8.0 N◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo