Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 11 cps repl

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download repl documenatation <<

Text preview - extract from the document

                                                                                             IG-7
                                IGNITION   -   CAMSHAFT POSITION SENSOR
                                                                                            IG0DN-03


                                REPLACEMENT
                                1.     REMOVE V-BANK COVER
                                (a)    Using a 5 mm hexagon wrench, remove the 3 cap nuts.
                                (b)    Loosen the V-bank cover fastener counterclockwise.
                                (c)    Remove the V-bank cover.
                                2.     REMOVE AIR CLEANER HOSE WITH RESONATOR
    5 mm                        3.     REMOVE CAMSHAFT POSITION SENSORS
    Hexagon                     (a)    Disconnect the 2 camshaft position sensor connectors.
    Wrench             A10518



                                (b)    Remove the bolt and camshaft position sensor. Remove
                                       the 2 camshaft position sensors.
                                (c)    Remove the O-rings from the camshaft position sensors.
                                4.     REINSTALL NEW CAMSHAFT POSITION SENSORS
                                (a)    Install new O-rings to new camshaft position sensors.
                                (b)    Install the camshaft position sensor with the bolt. Install
                                       the 2 camshaft position sensors.
                                       Torque: 8.0 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo