Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 24 bodydime generali

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download generali documenatation <<

Text preview - extract from the document

                                 GENERAL INFORMATION                                                                                                          DI-2
                                  1.   BASIC DIMENSIONS
                                       (a)   There are two types of dimensions in the diagram.
                                             (Three-dimensional distance)
                                             D Straight-line distance between the centers of two measuring points.




                                             (Two-dimensional distance)
                                             D Horizontal distance in forward/rearward between the centers of two measuring points.
                                             D The height from an imaginary standard line.
                                       (b)   Incases in which only one dimension is given, left and right are symmetrical.
                                       (c)   The dimensions in the following drawing indicate actual distance. Therefore, please use the dimensions as
                                             a reference.


                                  2.   MEASURING
                                       (a)   Basically, all measurements are to be done with a tracking gauge. For portions where it is not possible to use
                                             a tracking gauge, a tape measure should be used.
                                       (b)   Use only a tracking gauge that has no looseness in the body, measuring plate, or pointers.
               Plate Looseness




                                  HINT:
Pointer Looseness                 1.  The height of the left and right pointers must be equal.
                                  2.   Always calibrate the tracking gauge before measuring or after adjusting the pointer height.
                                  3.   Take care not to drop the tracking gauge or otherwise shock it.
                                  4.   Confirm that the pointers are securely in the holes.




                                       (c)   When using a tape measure, avoid twists and bends in the tape.
                                       (d)   When tracking a diagonal measurement from the front spring support inner hole to the suspension member
                                             upper rear installation hole, measure along the front spring support panel surface.

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo