Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 24 introduc symbols

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download symbols documenatation <<

Text preview - extract from the document

IN-4                                            INTRODUCTION - Symbols
SYMBOLS
The following symbols are used in the Welding Diagrams in Section RE of this manual to indicate cutting areas and the types of
weld required.

       SYMBOLS                        MEANING                                      ILLUSTRATION




                              SAW CUT OR
                              ROUGH CUT




                              REMOVE BRAZE




                              WELD POINTS

                              SPOT WELD OR
                              MIG PLUG WELD

                              (See page IN-5)




                              CONTINUOUS MIG
                              WELD (BUTT WELD
                              OR TACK WELD)




                              BRAZE




                              BODY SEALER
                                                 INTRODUCTION - Symbols                                             IN-5
Illustration of Weld Point Symbols
EXAMPLE:
 REMOVAL                                                      INSTALLATION

                         Cut and Join Location                                                 Butt Weld




                         --5                     110 mm                                --5


                                                                                 --2
                --2
                                         --6                                                           --6




                --5                                                          --5




                 --6                                                          --6

     --6                                                        --6


        Weld points                                                Weld points
  Remove weld point and panel position                        Weld method and panel position

SYMBOL         MEANING                   ILLUSTRATION       SYMBOL         MEANING                   ILLUSTRATION



             Remove
             Weld
                                                                         Spot Weld
             Points




             (Outside)


                                                                         Mig Plug
                                                                         Weld
             (Middle)




             (Inside)

                                                                         Spot MIG
                                                                         Weld
 HINT: Panel position symbols are as seen from
 the working posture.

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo