Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 20 bdg inst

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download inst documenatation <<

Text preview - extract from the document

                                                                                                         BO-85
                                                  BODY   -   BACK DOOR GLASS
                                                                                                          BO244-01



                  Adhesive
                                                 INSTALLATION
                                                 1.    CLEAN AND SHAPE CONTACT SURFACE OF BODY
                                                 (a) Using a knife, cut away any rough areas on the body.
                                                 HINT:
                                                 Leave as much of the adhesive on the body as possible.
                                                 (b) Clean the cutting surface of the adhesive with a piece of
                                                       shop rag saturated in cleaner.

                                        BO4420



                                                 2.   CLEAN REMOVED GLASS
                                                 (a)  Using a scraper, remove the adhesive sticking to the
                                                      glass.
                                                 (b) Clean the glass with cleaner.
                                                 NOTICE:
                                                 Do not touch the glass surface after cleaning it.



                                        BO5231



                                                 3.    COAT CONTACT SURFACE OF BODY WITH PRIMER
                Primer M                               "M"
                                                 Using a brush, Primer M to the exposed part of body on the ve-
                                                 hicle side.
                                                 NOTICE:
                                                  S    Let the primer coating dry for 3 minutes or more.
               Primer M                           S    Do not coat primer M to the adhesive.
                                                  S    Do not keep any of the opened primer M for later use.
             Adhesive                   H02865



                                                 4.  COAT CONTACT SURFACE OF GLASS WITH PRIMER
                                                     "G"
                             a
                                                 (a) Using a brush or a sponge, coat the edge of the glass and
                             a                       the contact surface with primer G.
                                                 (b) Before the primer dries, wipe it off with a clean shop rag.
                                    b    b       NOTICE:
                        c                         S  Let the primer coating dry for 3 minutes or more.
                        c                         S  Do not keep any of the opened primer G for later use.
               Primer G           Primer G
     a-a                    b-b




              Primer G
     c - c




                                        H02681



2001 SIENNA (RM787U)

                                                                  Author :             Date :             1762
BO-86
                                                      BODY   -    BACK DOOR GLASS

                                                    5.    APPLY ADHESIVE
                             a                      (a) Cut off the tip of the cartridge nozzle.
                             a                      HINT:
                                                    After cutting off the tip, use all adhesive within the time de-
                                     b b            scribed in the table below.
                       c
                                                                 Temperature                       Tackfree time
  a-a                  c
          B                b-b       B                           35 

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo