Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 20 bdg remo

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download remo documenatation <<

Text preview - extract from the document

                                                                                        BO-83
                                 BODY   -   BACK DOOR GLASS
                                                                                          BO243-01


                                REMOVAL
                                1.    REMOVE BACK DOOR ASSIST GRIP
                                (a) Using a screwdriver, open the covers.
                                HINT:
                                Tape the screwdriver tip before use.
                                (b) Remove the 2 screws and assist grip.


                       H02348



                                2.    REMOVE BACK DOOR PULL STRAP
                                (a) Using a screwdriver, remove the strap cover.
                                HINT:
                                Tape the screwdriver tip before use.
                                (b) Remove the screw and pull strap.




                       H02349



  : 5 Clips                     3.    REMOVE CENTER GARNISH
                                Using a screwdriver, remove the center garnish.
                                HINT:
                                Tape the screwdriver tip before use.




                       H02350




   : 3 Clips
                                4.    REMOVE SIDE GARNISH
                                (a) Using a screwdriver, remove the side garnish.
                                HINT:
                                Tape the screwdriver tip before use.
                                (b) Employ the same manner described above to the other
                                      side.



                       H02351



   : 11 Clips                   5.    REMOVE DOOR TRIM BOARD
                                (a)   Insert a screwdriver between the door and door trim to pry
                                      the trim out.
                                NOTICE:
                                Be careful not to damage the door and door trim.
                                HINT:
                                Tape the screwdriver tip before use.
                                (b) Pull the trim to remove it.
                       H02352



2001 SIENNA (RM787U)

                                                 Author :             Date :              1760
BO-84
                                  BODY   -   BACK DOOR GLASS

                                6.  REMOVE REAR WIPER ARM
                                Remove the nut and wiper arm.




                       H02368



 Protective Tape                7.    REMOVE BACK DOOR GLASS
                                (a) Push piano wire through from the interior.
                                (b) Tie both wire ends to wooden blocks or similar object.
                                HINT:
                                Apply protective tape to the outer surface to keep the surface
                                from being scratched.
                                NOTICE:
                                When separating the glass, take care not to damage the
                       H02678   paint and exterior.

                                (c) Cut the adhesive by pulling the piano wire around it.
                                HINT:
                                Cut the adhesive areas as shown in the illustration, leaving the
                                adhesive where the clips are.




                       H02679



 Protective Tape                (d) Let the piano wire pass as shown in the illustration, cut off
                                    the adhered part to the clips.
                                NOTICE:
                                Do not damage the glass retainers.
                                (e) Remove the glass.
                                NOTICE:
                                Leave as much of the adhesive on the body as possible
                                when cutting off the glass.
                       H02680




2001 SIENNA (RM787U)

                                                   Author :             Date :              1761

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo