Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 20 bds repl

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download repl documenatation <<

Text preview - extract from the document

BO-34
                                                  BODY   -   BACK DOOR STAY


                                              BACK DOOR STAY                                             BO030-03


                                              REPLACEMENT
                                              1.    REMOVE BACK DOOR STAY
                                              (a) Remove the bolt and back door stay from the back door.
                                              HINT:
                                              While supporting the back door with your hand, remove the
                                              back door stay.
                                              (b) Remove the bolts and back door stay from the body.
                                              2.    IF NECESSARY, REPLACE BACK DOOR STAY
                                              NOTICE:
                                              When handling the back door stay.
                                               S    Do not disassemble the back door stay because the
                                                    cylinder is filled with pressurized gas.




                                              S      If the back door stay is to be replaced, drill a 2.0 - 3.0
                                                     mm (0.079 - 0.118 in.) hole in the bottom of the back
                       150 mm (5.91 in.)             door stay as shown in the illustration to completely
                                                     release the high-pressure gas before disposing of it.
                                              S      When drilling, chips may fly out so work carefully.
                                              S      The gas is colorless, odorless and non-toxic.
                                              S      When working, handle the back door stay carefully.
                                                     Never score or scratch the exposed part of the piston
                                     H02357          rod, and never allow paint or oil to get on it.
                                              S      Do not turn the piston rod and cylinder with the back
                                                     door stay fully extended.
                                              3.     INSTALL BACK DOOR STAY
                                              (a)    Install the bolts and back door stay to the body.
                                                     Torque: 22 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo