Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 20 roohea remo

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download remo documenatation <<

Text preview - extract from the document

BO-108
                                     BODY   -   ROOF HEADLINING
                                                                                           BO3Y7-01


                                REMOVAL
                                1.      REMOVE REAR NO.1 SEAT
                                2.      REMOVE REAR NO.2 SEAT




   : 4 Clips                    3.    REMOVE BACK DOOR SCUFF PLATE
                                Using a screwdriver, remove the back door scuff plate.
                                HINT:
                                Tape the screwdriver tip before use.
                                4.    REMOVE SLIDE DOOR SCUFF PLATE




                       H02371



    : 3 Clips                   5.    REMOVE REAR LH QUARTER TRIM PANEL
                                (a) Using a screwdriver, remove the speaker grille.
                                HINT:
                                Tape the screwdriver tip before use.
                                (b) Remove the quarter trim cover.




                       H02372



                                (c)     Using a screwdriver, remove the rear side trim board cov-
                                        er.
                                HINT:
                                Tape the screwdriver tip before use.
                                (d) Remove the luggage room light, then disconnect the con-
                                      nector.



                       H02373



    : 9 Clips                   (e)     Remove the slide door courtesy light, then disconnect the
    : 3 Clips                           connector.
                                (f)     Remove the 2 screws, clip and rear LH quarter trim panel.
                                (g)     w/ LH side power slide door:
                                        Remove the 3 screws and cup holder sub-assembly from
                                        the trim panel.



                       H02393



2001 SIENNA (RM787U)

                                                      Author :           Date :              1785
                                                                                             BO-109
                                       BODY   -   ROOF HEADLINING

   : 3 Clips                         6.    REMOVE RH QUARTER TRIM PANEL
                                     (a) Using a screwdriver, remove the speaker grille.
                                     HINT:
                                     Tape the screwdriver tip before use.
                                     (b) Using a screwdriver, remove the air inlet grille.
                                     HINT:
                                     Tape the screwdriver tip before use.

                            H02379



                                     (c)   Using a screwdriver, remove the rear side trim board cov-
                                           er.
                                     HINT:
                                     Tape the screwdriver tip before use.
                                     (d) Remove the slide door courtesy light, then disconnect the
                                           connector.



                            H03151




                       : 9 Clips     (e)   Remove the 2 screws, clip and RH quarter trim panel.
                       : 3 Clips




                            H02380




   : 2 Clips                         7.    REMOVE NO.2 REAR WINDOW SIDE GARNISH
                                     (a) Using a screwdriver, remove the quarter pillar cover.
                                     HINT:
                                     Tape the screwdriver tip before use.
                                     (b) Employ the same manner described above to the other
                                           side.



                            H02375



   : 3 Clips                         (c)   Remove the 2 screws and No.2 rear window side garnish.
                                     8.    REMOVE REAR WINDOW SIDE GARNISH
                                     (a)   Remove the No.1 rear seat outer belt shoulder anchor.
                                           Torque: 43 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo