Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 20 sdg remo

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download remo documenatation <<

Text preview - extract from the document

BO-68
                                       BODY   -   SLIDE DOOR GLASS
                                                                                               BO0SV-02


   : 2 Clips                         REMOVAL
                                     1.    REMOVE CUP HOLDER
                                     Using a screwdriver, remove the cup holder as shown in the il-
                                     lustration.




                            H02426




  : 10 Clips                         2.    REMOVE DOOR TRIM
                                     (a)   Remove the screw.
                                     (b)   Insert a screwdriver between the door and door trim to pry
                                           the trim out.
                                     NOTICE:
                                     Be careful not to damage the door and door trim.
                                     HINT:
                                     Tape the screwdriver tip before use.
                            H02427   (c) Pull the trim to remove it.


                       : 4 Clips     3.    REMOVE UPPER NO.1 TRIM COVER
                                     Using a screwdriver, remove the upper No.1 trim cover.
                                     HINT:
                                     Tape the screwdriver tip before use.




                            H02428




   : 2 Clips                         4.    REMOVE UPPER NO.2 TRIM COVER
                                     Using a screwdriver, remove the upper No.2 trim cover.
                                     HINT:
                                     Tape the screwdriver tip before use.




                            H02429



                                     5.    REMOVE WINDOW GARNISH
                                     (a) Using a screwdriver, remove the trim board cover.
                                     HINT:
                                     Tape the screwdriver tip before use.
                                     (b) Remove the 3 screws and window garnish.




                            H02432



2001 SIENNA (RM787U)

                                                        Author :            Date :               1745
                                                                                        BO-69
                                 BODY   -   SLIDE DOOR GLASS


  Protective Tape               6.    REMOVE SLIDE DOOR GLASS
                                (a) Push a piano wire through from the interior.
                                (b) Tie both wire ends to wooden blocks or similar object.
                                HINT:
                                Apply protective tape to the outer surface to keep the surface
                                from being scratched.
                                NOTICE:
                                When separating the glass, take care not to damage the
                       H02669   paint and exterior.

                                (c) Cut the adhesive by pulling the piano wire around it.
                                HINT:
                                Cut the adhesive areas as shown in the illustration, leaving the
                                adhesive where the clips are.




                       H02670



  Protective Tape               (d) Push the piano wire through as shown in the illustration,
                                    cut off the adhered part to the clips.
                                (e) Remove the glass.
                                NOTICE:
                                Leave as much of the adhesive on the body as possible
                                when cutting off the glass.



                       H02671




2001 SIENNA (RM787U)

                                                  Author :            Date :              1746

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo