Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 20 seabel insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

BO-152
                                        BODY      -   SEAT BELT
                                                                                                      BO06F-06


                                      INSPECTION
                                      CAUTION:
                                      Replace the seat belt assembly (outer belt, inner belt, bolts,
                                      nuts or sill-bar) if it has been used in a severe impact. The
                                      entire assembly should be replaced even if damage is not
                                      obvious.
                                      1.    Except manual type:
                                            RUNNING TEST (IN SAFE AREA)
                                      (a) Fasten the front seat belts.

                                      (b)     Drive the car at 10 mph (16 km/h) and slam on the brakes.
                                              Check that the belt locks and cannot be extended at this
                                              time.
                                      HINT:
                                      Conduct this test in a safe area. If the belt does not lock, remove
                                      the belt mechanism assembly and conduct the following static
                                      check. Also, whenever installing a new belt assembly, verify the
                                      proper operation before installation.
                             BO0632   2.    Driver's seat belt (ELR):
                                            STATIC TEST
                                      (a) Make sure that the belt locks when pulled out quickly.
                                      (b) Remove the locking retractor assembly.
                                      (c) Tilt the retractor slowly.




                                      (d)      Make sure that the belt can be pulled out at a tilt of 15 de-
          15

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo