Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 20 slidoo disa

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download disa documenatation <<

Text preview - extract from the document

                                                                                                 BO-19
                                          BODY   -   SLIDE DOOR
                                                                                                   BO0S5-03


   : 2 Clips                             DISASSEMBLY
                                         1.    REMOVE CUP HOLDER
                                         Using a screwdriver, remove the cup holder as shown in the il-
                                         lustration.




                                H02426




  : 10 Clips
                                         2.    REMOVE DOOR TRIM
                                         (a)   Remove the screw.
                                         (b)   Insert a screwdriver between the door and door trim to pry
                                               the trim out.
                                         NOTICE:
                                         Be careful not to damage the door and door trim.
                                         HINT:
                                         Tape the screwdriver tip before use.
                                H02427   (c) Pull the trim to remove it.

                        : 4 Clips        3.    REMOVE UPPER NO.1 TRIM COVER
                                         Using a screwdriver, remove the upper No.1 trim cover.
                                         HINT:
                                         Tape the screwdriver tip before use.




                                H02428




   : 2 Clips
                                         4.    REMOVE UPPER NO.2 TRIM COVER
                                         Using a screwdriver, remove the upper No.2 trim cover.
                                         HINT:
                                         Tape the screwdriver tip before use.




                                H02429



                                         5.    REMOVE SERVICE HOLE COVER
                                         Remove the service hole cover.
                       Panel             NOTICE:
                                         At the time of reassembly, please refer to the following
                                         item.
      Cotton
      Tape                               Do not block the trim clip sealing with the service hole cov-
                        Cover
                                         er.

                                BO2455



2001 SIENNA (RM787U)

                                                           Author :            Date :              1696
BO-20
                                       BODY   -   SLIDE DOOR

                                  6.      w/o Power slide door:
                                          REMOVE SLIDE DOOR FULL OPEN STOP LOCK
                                  (a)     Disconnect the cable from the slide door lock control as-
                                          sembly.
                                  (b)     Remove the hole plug, cable clamp and slide door full
                                          open stop lock.
                                  7.      w/ Power slide door:
                                          REMOVE SLIDE DOOR FULL OPEN STOP LOCK
                         H02430



                                  8.      REMOVE SLIDE DOOR LOCK
 w/o Power slide door:
                                  (a)     Disconnect the cable from the slide door lock control as-
                                          sembly.
                                  (b)     Disconnect the connector.
                                  (c)     Remove the clip.
                                  (d)     Remove the 3 screws.
                                          Torque: 4.9 N

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo