Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 20 wind inst

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download inst documenatation <<

Text preview - extract from the document

BO-62
                                               BODY   -   WINDSHIELD
                                                                                                    BO241-02



                    Adhesive
                                             INSTALLATION
                                             1.    CLEAN AND SHAPE CONTACT SURFACE OF BODY
                                             (a) Using a knife, cut away any rough areas on the body.
                                             HINT:
                                             Leave as much of the adhesive on the body as possible.
                                             (b) Clean the cutting surface of the adhesive with a piece of
                                                   shop rag saturated in cleaner.
                                             HINT:
                                    BO4420
                                             Even if all the adhesive has been removed, clean the body.

                                             2.   CLEAN REMOVED GLASS
                                             (a)  Using a scraper, remove the adhesive sticking to the
                                                  glass.
                                             (b) Clean the glass with cleaner.
                                             NOTICE:
                                             Do not touch the glass surface after cleaning it.



                                    BO5231



                                             3.   REPLACE STOPPERS
                                             (a)  Remove the damaged stoppers.
                                             (b)  Cut off the old adhesive around the stopper installation
                                                  area.
                A                            NOTICE:
                                             Be careful not to damage the glass.
                                             (c) Clean the installation area.
                                             (d) Install new stoppers onto the glass.
                                    H00930        A: 13.6 mm (0.98 in.)

                                             4.   REPLACE DAM
                        a                    (a)  Remove the damaged dam.
                        a                    (b)  Clean the installation area.
                                             (c)  Install a new dam with adhesive tape as shown in the il-
                                                  lustration.
                                             NOTICE:
                                             Do not touch the glass surface after cleaning it.




               a-a

                        8.0 mm
                       (0.31 in.)




                                    H02662



2001 SIENNA (RM787U)

                                                                Author :          Date :              1739
                                                                                                           BO-63
                                                 BODY   -   WINDSHIELD

                                                5.   INSTALL NO.2 DAM
                                                (a)  Remove the damaged dam.
                                                (b)  Clean the installation area.
                                                (c)  Install the dam with adhesive tape as shown in the illustra-
                                                     tion.
                                                NOTICE:
                                                Do not touch the glass surface after cleaning it.
                                                     A: 22.0 mm (0.87 in.)
                              a                      B: 3.0 

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo