Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 21 acsy ovi
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ovi documenatation <<
Text preview - extract from the document
AC-3
AIR CONDITIONING - AIR CONDITIONING SYSTEM
AC0RW-03
ON-VEHICLE INSPECTION
1. INSPECT REFRIGERANT VOLUME
Observe the sight glass on the liquid tube.
Test conditions:
S Running engine at 1,500 rpm
S Blower speed control switch set at "HI"
S A/C switch ON
S Temperature control set at "MAX. COOL"
Sight Glass I03837
S Fully open doors
Item Symptom Amount of refrigerant Remedy
(1) Check for gas leakage with gas leak de-
1 Bubbles present in sight glass *Insufficient tector and repair if necessary
(2) Add refrigerant until bubbles disappear
2 No bubbles present i sight glass None, sufficient or too much Refer to item 3 and 4
(1) Check for gas leakage with gas leak de-
No temperature difference between com-
3 Empty or nearly empty tector and repair if necessary
pressor inlet and outlet
(2) Add refrigerant until bubbles disappear
Temperature between compressor inlet and
4 Correct or too much Refer to items 5 and 6
outlet is noticeably different
(1) Discharge refrigerant
Immediately after air conditioning is turned
5 Too much (2) Evacuate air and charge proper amount
off, refrigerant in sight glass stays clear
of new refrigerant
When air conditioning is turned off, refriger-
6 Correct -
ant foams and then stays clear
*: Bubbles in the sight glass with ambient temperatures higher than usual can be considered normal if cooling
is sufficient.
2. INSPECT REFRIGERANT PRESSURE WITH MAN-
IFOLD GAUGE SET
This is a method in witch the trouble is located by using a man-
ifold gauge set. Read the manifold gauge pressure when the
these conditions are established.
Test conditions:
S Temperature at the air inlet with the switch set
at RECIRC is 30 - 35 ◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo