Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 21 camc remo

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download remo documenatation <<

Text preview - extract from the document

AC-62
                       AIR CONDITIONING   -   COMPRESSOR AND MAGNETIC CLUTCH
                                                                                          AC0SP-02


                                  REMOVAL
                                  1.    RUN ENGINE AT IDLE SPEED WITH A/C ON FOR
                                        APPROX. 10 MINUTES
                                  2.    STOP ENGINE
                                  3.    DISCONNECT NEGATIVE (- ) TERMINAL CABLE
                                        FROM BATTERY
                                  4.    DISCHARGE REFRIGERANT FROM REFRIGERATION
                                        SYSTEM
                                  5.    REMOVE DRIVE BELT (See page AC-18 )

                                  6.   DISCONNECT DISCHARGE AND SUCTION HOSES
                                  Remove the 2 bolts and disconnect the both hoses.
                                  NOTICE:
                                  Cap the open fittings immediately to keep moisture or dirt
                                  out of the system.




                         I02436



                                  7.    REMOVE GENERATOR
                                  (a)   Disconnect the generator connector.
                                  (b)   Remove the nut, and disconnect the generator wire.
                                  (c)   Disconnect the wire harness from the clip.
                                  (d)   Remove the pivot bolt, plate washer, adjusting lock bolt
                                        and generator.



                        P19978



                                  8.    REMOVE COMPRESSOR
                                  (a)   Disconnect the connector.
                                  (b)   Remove the 2 bolts, nut and drive belt adjusting bar
                                        bracket.




                        N20259



                                  (c)   Remove the 3 bolts and compressor.




                        N20241



2001 SIENNA (RM787U)

                                                    Author :            Date :              1903

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo