Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 1998-2003 Approved FSM 21 racca insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download insp documenatation <<

Text preview - extract from the document

AC-130
                                            AIR CONDITIONING         -         REAR A/C CONTROL ASSEMBLY
                                                                                                                                           AC0U7-03


                                                       INSPECTION
                                                       1.       INSPECT HEATER BLOWER SWITCH CONTINUITY
                LO M1 M2
          OFF           HI
                                                              Position / Circuit            Tester connection            Specified condition
                                                                     OFF                           -                       No continuity
                              3         1
                              87      5 4                                LO                       1-3                        Continuity
                                                                         M1                       1-4                        Continuity
                                                                         M2                       1-8                        Continuity

                                              I03796                     HI                       1-5                        Continuity
                                                              Illumination circuit                7-8                        Continuity
                                                       Switch continuity:
                                                       If continuity is not as specified, replace the switch.
                                                       Illumination circuit:
                                                       If continuity is not as specified, check the bulb.




                                                       2.    Manual A/C:
                                                             INSPECT SELECT SWITCH OPERATION
 "WARM"
                    "COOL"                             (a) Gradually turn the select switch from the "WARM" to
                                                             "COOL" side, then check that the resistance between ter-
                                                             minals 5 and 6 increases from 0 to 3.0 k.
                               65                      If operation is not as specified, replace the heater control base.



                                              I21137



                                                       (b)      Check the continuity between terminals at each control
          "B"                                                   knob position, as shown in the chart.
  "A"                   "C"                                        Position                 Tester connection            Specified condition
                                                                         "A"                      3-4                        Continuity
                                                             Between "B" and "C"                  5-6                        Continuity
                                   6 5 43
                                                       If continuity is not as specified replace the heater control base.
                                                       3.    Auto A/C:
                                                             INSPECT BLOWER SWITCH OPERATION (See page
                                              I21138
                                                             DI-784 )
                                                       4.    Auto A/C:
                                                             INSPECT TEMP. OPERATION (See page DI-787 )




2001 SIENNA (RM787U)

                                                                                     Author :                   Date :                       1971

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo