Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 202xl ciradiob
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ciradiob documenatation <<Text preview - extract from the document 05-1241
DIAGNOSTICS - AUDIO SYSTEM 055LR-05
RADIO BROADCAST CANNOT BE RECEIVED (BAD RECEPTION)
INSPECTION PROCEDURE
1 CHECK IF RADIO AUTO-SEARCH FUNCTIONS PROPERLY
(a) Check if the radio auto-search functions properly.
(1) Perform the auto-search of the radio and check that it functions normally.
Standard: The radio auto-search functions properly.
OK REPLACE RADIO RECEIVER ASSY
NG
2 CHECK OPTIONAL COMPONENT
(a) Check optional component (Sun shade film, telephone antenna etc.).
(1) Check whether or not any optional component is installed, such as the sunshade film and the
telephone antenna.
Standard: Optional component is installed.
OK EFFECT FROM OPTIONAL COMPONENT
NG
3 CHECK ANTENNA FOR NOISE PRODUCTION
(a) Noise Check with Antenna
(1) With the ignition switch in ACC, turn on the radio and choose the AM mode.
(2) Place a tip of a screwdriver or the antenna of the antenna assembly w/ holder and check that
the noise heard from the speaker.
Standard: Noise occurs.
OK REPLACE RADIO RECEIVER ASSY
NG
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1424
05-1242
DIAGNOSTICS - AUDIO SYSTEM
4 INSPECT RADIO RECEIVER ASSY(ANTENNA)
(a) Preparation for Check
(1) Remove the antenna plug of the radio receiver as-
sembly.
(b) Noise Check
(1) With the radio receiver assy connector connected,
turn the ignition switch to ACC.
(2) Turn on the radio and choose the AM mode.
(3) Place a flat-head screwdriver or a metal such as a
E50367 thin wire on the antenna jack of the radio receiver
assy and check that the noise heard from the
speaker.
Standard: Noise occurs.
OK REPLACE RADIO RECEIVER ASSY
NG
REPLACE ANTENNA CORD SUB-ASSY
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1425
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo