Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 206dv cib2796

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
cib2796


>> Download cib2796 documenatation <<

Text preview - extract from the document
05-1852
                                              DIAGNOSTICS   -   ENGINE IMMOBILIZER SYSTEM                       05A2G-02




    DTC                B2796            NO COMMUNICATION IN IMMOBILISER
                                        SYSTEM

    DTC                B2798            COMMUNICATION MALFUNCTION NO.2

CIRCUIT DESCRIPTION
This code is stored in the memory when a key that does not have a transponder chip is inserted or if commu-
nication between the key and transponder key ECU is impossible.
    DTC No.                     DTC Detection Condition                                     Trouble Area
                                                                     S Key
                                                                     S Wire harness
     B2796       No communication
                                                                     S Transponder key amplifier
                                                                     S Transponder key ECU assy
     B2798       Communication error                                 S Key

WIRING DIAGRAM


                                                                                         T6
              I14
                                                                                         Transponder Key ECU Assy
              Transponder Key Amplifier
                                 Amplifier
                        ANT1                 VC5     1             Y-B                     8
                                                                                                   VC5

                                             CODE 4                 Y                     11
                                                                                                   CODE


                Coil

                                             TXCT 5                Y-R                    12
                                                                                                   TXCT

                                             GND     7             BR-R                   13
                                                                                                   AGND
                        ANT2



                                                                                                                B62676




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                        Author :                   Date :           2035
                                                                                                   05-1853
                                            DIAGNOSTICS   -   ENGINE IMMOBILIZER SYSTEM

INSPECTION PROCEDURE
HINT:
Start the inspection from step 1 when using the hand-held tester and start from step 2 when not using the
hand-held tester.
      1      READ VALUE OF HAND-HELD TESTER
             (IMMOBILISER ECU (TRANSPONDER KEY ECU ASSY) (SWITCH CONDITION))

(a)       Connect the hand-held tester to the DLC3.
(b)       Turn the ignition switch ON with the key that will not start the engine.
(c)       Select IMMOBILISER on the hand-held tester.
          OK:
          SET  Ignition switch ON
          UNSET  Without key
                                                    OK        NORMAL

      NG

      2      CHECK WHETHER ENGINE STARTS WITH OTHER KEYS

(a)       Check whether the engine starts with the other keys for the vehicle.
                                                    OK        RE-REGISTER OR REPLACE KEY THAT WILL
                                                              NOT START ENGINE

      NG

HINT:
Start the inspection from step 3 when using the hand-held tester and start from step 4 when not using the
hand-held tester.
      3      READ VALUE OF HAND-HELD TESTER
             (IMMOBILISER ECU (TRANSPONDER KEY ECU ASSY) (SWITCH CONDITION))

(a)       Connect the hand-held tester to the DLC3.
(b)       Turn the ignition switch ON with the key that will not start the engine.
(c)       Select the item ANTENNA COIL on the hand-held tester.
          OK: NORMAL
          NG: FAIL
                                                    NG        REPLACE TRANSPONDER KEY ECU ASSY

      OK




 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                    Author :              Date :     2036
05-1854
                                             DIAGNOSTICS      -   ENGINE IMMOBILIZER SYSTEM

      4      CHECK WIRE HARNESS (TRANSPONDER KEY ECU ASSY - TRANSPONDER KEY
             AMPLIFIER) (TRANSPONDER KEY ECU ASSY OR TRANSPONDER KEY AMPLIFI-
             ER - BODY GROUND)

                                                   (a)    Disconnect the T6 ECU and I14 amplifier connectors.
 Wire Harness Side
                                                   (b)    Check the resistance between the wire harness side con-
                                                          nectors.
            T6                                            Standard:
            Transponder Key ECU Assy                              Terminal No.                  Specified Condition
                                                   T6-8 (VC5) - I14-1 (VC5)                         Below 1 
                                                   T6-1 1 (CODE) - I14-4 (CODE)                     Below 1 
                                                   T6-12 (TXCT) - I14-5 (TXCT)                      Below 1 
                                                   T6-13 (AGND) - I14-7 (GND)                       Below 1 
                                                   (c)    Check the resistance between the T6 ECU or I14 amplifi-
                                                          er wire harness side connector and the body ground.
              I14                                         Standard:
              Transponder Key Amplifier                           Terminal No.                  Specified Condition
                                                   T6-8 (VC5) or I14-1 (VC5) -
                                                                                                 10 k or higher
                                                                             Body ground
                                                   T6-1 1 (CODE) or I14-4 (CODE) -
                                                                                                 10 k or higher
                                                                             Body ground
                                                   T6-12 (TXCT) or I14-5 (TXCT) -
                                                                                                 10 k or higher
 B63404                                                                     Body ground
 B55013                                   B64974
                                                   T6-13 (AGND) or I14-7 (GND) -
                                                                                                 10 k or higher
                                                                            Body ground

                                                         NG       REPAIR OR           REPLACE      HARNESS            AND
                                                                  CONNECTOR

      OK

      5      CHECK OPERATION OF TRANSPONDER KEY AMPLIFIER

(a)       After replacing the transponder key amplifier, check that the engine starts.
                                                         NG       REPLACE TRANSPONDER KEY ECU ASSY

      OK

  NORMAL (TRANSPONDER KEY AMPLIFIER DEFECTIVE)




 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                           Author :           Date :                  2037



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo