Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 20jw820a cipw013
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cipw013 documenatation <<
Text preview - extract from the document
05-1568 DIAGNOSTICS - POWER WINDOW CONTROL SYSTEM (W/ JAM
PROTECTION) 059YU-09
MANUAL UP/DOWN FUNCTION DOES NOT OPERATE ON
PASSENGER SIDE
CIRCUIT DESCRIPTION
If the manual UP/DOWN function does not operate, the power window motor, the regulator switch or the wire
harness may be malfunctioning.
WIRING DIAGRAM
P37
P41 Power Window Regulator
Power Window Regulator
Switch Assy (Passenger Side)
Motor Assy RH (Passenger Side)
1 G 1 D
2 R 3 U
L 4 B
From Power Window Relay
R-L 5 SU
To Power Window Master Switch (Ground)
B-W 2 SD
To Power Window Master Switch (Ground)
B62900
INSPECTION PROCEDURE
1 CHECK WIRE HARNESS (POWER SOURCE)
(a) Disconnect the P37 regulator switch connector.
Wire Harness Side
(b) Turn the ignition switch ON.
P37 (c) Check the voltage between the terminal 4 of the wire har-
Power Window Regulator
ness side connector and the body ground.
Switch Assy (Passenger Side)
Standard:
Terminal No. Condition Specified Condition
P37-4 - Body ground Ignition switch ON 10 to 14 V
B62901
NG REPAIR OR REPLACE HARNESS AND
CONNECTOR (REGULATOR SWITCH - RELAY)
OK
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1751
DIAGNOSTICS - POWER WINDOW CONTROL SYSTEM (W/ JAM 05-1569
PROTECTION)
2 INSPECT POWER WINDOW REGULATOR SWITCH ASSY (PASSENGER SIDE)
(a) Remove the regulator switch.
(b) Check the resistance between the switch terminals when
the switch is operated, as shown in the table below.
5 4 3 2 1 Standard:
Terminal No. Regulator Switch Specified Condition
1 - 2, 3 - 4 UP
1 - 2, 3 - 5 OFF Below 1
1 - 4, 3 - 5 DOWN
B63163
NG REPLACE POWER WINDOW REGULATOR
SWITCH ASSY (PASSENGER SIDE)
OK
3 CHECK WIRE HARNESS (REGULATOR SWITCH - MOTOR) (REGULATOR
SWITCH - BODY GROUND)
(a) Disconnect the P41 motor connector.
Wire Harness Side (b) Check the resistance between the wire harness side con-
nectors.
Standard:
P37 Terminal No. Specified Condition
Power Window Regulator P37-1 (D) - P41-1
Below 1
Switch Assy (Passenger Side) P37-3 (U) - P41-2
(c) Check the resistance between the P37 regulator switch
connector and body ground.
Standard:
Terminal No. Specified Condition
P41 P37-1 (D) - Body ground
10 k or higher
Power Window Regulator P37-3 (U) - Body ground
Motor Assy RH (Passenger Side)
NG REPAIR OR REPLACE HARNESS AND
B63164
CONNECTOR
OK
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1752
05-1570 DIAGNOSTICS - POWER WINDOW CONTROL SYSTEM (W/ JAM
PROTECTION)
4 INSPECT POWER WINDOW REGULATOR MOTOR ASSY RH (PASSENGER SIDE)
(a) Remove the motor (See page 75-8 ).
Motor Gear
Clockwise (b) Apply battery voltage to connector terminals 1 and 2.
(c) Check that the motor smoothly rotates.
NOTICE:
Do not apply battery voltage to any terminals except termi-
nals 1 and 2.
Counterclockwise Standard:
Terminal No. Specified Condition
B67305 Battery positive (+) 1
Motor gear rotates clockwise
Battery negative (-) 2
Battery positive (+) 2
Motor gear rotates counterclockwise
Battery negative (-) 1
NG REPLACE POWER WINDOW REGULATOR
MOTOR ASSY RH (PASSENGER SIDE)
OK
REPAIR OR REPLACE HARNESS AND CONNECTOR (MASTER SWITCH - REGULATOR SWITCH)
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1753
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo