Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 20jw820a preche40
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download preche40 documenatation <<Text preview - extract from the document DIAGNOSTICS - POWER WINDOW CONTROL SYSTEM (W/ JAM 05-1555
PROTECTION)
05BME-02
PRE-CHECK
1. USING HAND-HELD TESTER
(a) Connect the hand-held tester to the DLC3.
(b) Monitor the ECU data by following the prompts on the tester screen.
HINT:
The hand-held tester has a "Snapshot" function which records the monitored data.
Refer to the hand-held tester operator's manual for further details.
2. DATA LIST
HINT:
Using the DATA LIST displayed by the hand-held tester, you can read the values of the switch, sensor, ac-
tuator, etc. without parts removal. Reading the DATA LIST as the first step of troubleshooting is one way to
shorten the labor time.
(a) Connect the hand-held tester to the DLC3.
(b) Turn the ignition switch ON.
(c) Read the DATA LIST according to the display on the tester.
Standard (Multiplex network body ECU):
Measurement Item/
Item Normal Condition Diagnostic Note
Display (Range)
Ignition switch signal/ ON: Key is in ON or START position
IG SW -
ON or OFF OFF: Key is in OFF or ACC position
Driver side door
ON: Driver side door is open
D DOR CTY SW courtesy switch signal/ -
OFF: Driver side door is closed
ON or OFF
Passenger side door
ON: Passenger side door is open
P DOR CYT SW courtesy switch signal/ -
OFF: Passenger side door is closed
ON or OFF
3. ACTIVE TEST
HINT:
Performing the ACTIVE TEST using the hand-held tester allows you to operate the relay, VSV, actuator,
etc. without parts removal. Performing the ACTIVE TEST as the first step of troubleshooting is one way to
shorten the labor time.
It is possible to display the DATA LIST during the ACTIVE TEST.
(a) Connect the hand-held tester to the DLC3.
(b) Turn the ignition switch ON.
(c) Perform the ACTIVE TEST according to the display on the tester.
Standard (Multiplex network body ECU):
Item Test Detail Diagnostic Note
IG OFF P/W Ignition switch OFF power window control permission output ON/OFF -
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1738
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo