
05-1413
DIAGNOSTICS - REAR SEAT AUDIO SYSTEM 05BUG-02
QUALITY OF SOUND IS POOR OR NO SOUND CAN BE HEARD
WIRING DIAGRAM
R24
Stereo Component
Radio Receiver Assy Controller Assy
15 15 21 4
B W W 5
RSR+ R13 R9 IH3 BK2 RSR+
(*1) (*2, *3)
16 16 22 5
W W W 4
RSR- R13 R9 IH3 BK2 RSR-
(*1) (*2, *3)
17 17 23 6
R W W 3
RSL+ R13 R9 IH3 BK2 RSL+
(*1) (*2, *3)
18 18 24 7
G W W 2
RSL- R13 R9 IH3 BK2 RSL-
(*1) (*2, *3)
14 14 20 3
(*1) RSLD R13 R9
6
IH3 BK2 SLD
(*2, *3) SLD (Shielded) (Shielded) (Shielded)
(*1) (*2, *3)
J23
20 20 7 J/C 7
W-B W-B W-B
GND R15 R7 R5 IF2
B B
(*1) (*2) (*3)
IF
*1: 10 Speaker w/ Navigation system
*2: 10 Speaker w/o Navigation system
*3: 6 Speaker
I35034
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1596
05-1414
DIAGNOSTICS - REAR SEAT AUDIO SYSTEM
INSPECTION PROCEDURE
1 CHECK HARNESS AND CONNECTOR(RADIO RECEIVER ASSY - STEREO
COMPONENT CONTROLLER ASSY)
Radio Receiver Assy: (a) Disconnect the radio receiver assy and stereo compo-
w/ Navigation system: nent controller assy connector.
(b) In order to check for an open circuit, measure the resis-
tance between the terminals, as shown in the chart.
Standard:
Tester connection Specified condition
RSR+ - 5 Below 1
RSR- - 4 Below 1
RSL+ - 3 Below 1
RSL- RSLD Below 1
RSR+ RSL- - 2
RSL+ RSR- RSLD - 6 Below 1
w/o Navigation system (10 Speaker): SLD - 6 Below 1
(c) In order to check for a short circuit, measure the resis-
tance between the terminals, as shown in the chart.
Standard:
Tester connection Specified condition
SLD RSR+ - Body ground 10 k or higher
RSR- - Body ground 10 k or higher
RSL- RSL+ - Body ground 10 k or higher
RSL+
RSR- RSR+ RSL- - Body ground 10 k or higher
w/o Navigation system (6 Speaker): RSLD - Body ground 10 k or higher
SLD - Body ground 10 k or higher
SLD
RSL- RSR+
RSL+ RSR-
I35959
Stereo Component Controller Assy:
5
4 3 2
I35035
NG REPAIR OR REPLACE HARNESS OR
CONNECTOR
OK
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1597
05-1415
DIAGNOSTICS - REAR SEAT AUDIO SYSTEM
2 INSPECT RADIO RECEIVER ASSY(RSR+, RSR-, RSL+, RSL-, GND)
Radio Receiver Assy: (a) Disconnect the radio receiver assy connector.
w/ Navigation system: (b) In order to check for an open circuit, measure the resis-
tance between the terminals according to the condition,
RSR- as shown in the chart.
Standard:
Tester connection Condition Specified condition
GND - Body ground Always Below 1
RSL-
(c) Using an oscilloscope, check the signal waveform be-
RSL+ RSR+ tween the terminals according to the conditions, as
GND shown in the chart.
w/o Navigation system (10 Speaker):
RSL- RSR-
RSL+ RSR+
GND
w/o Navigation system (6 Speaker):
RSL- RSR-
RSL+ RSR+
GND
I35958
Standard:
Tester connection Condition Specified condition
RSR+ - GND While voice sound is being produced A waveform synchronized with sound is output
RSR- - GND While voice sound is being produced A waveform synchronized with sound is output
RSL+ - GND While voice sound is being produced A waveform synchronized with sound is output
RSL- - GND While voice sound is being produced A waveform synchronized with sound is output
NG REPLACE RADIO RECEIVER ASSY
OK
REPLACE STEREO COMPONENT CONTROLLER ASSY
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1598