Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 20v15 ciambien

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
ciambien


>> Download ciambien documenatation <<

Text preview - extract from the document
05-380
                                          DIAGNOSTICS   -   TIRE PRESSURE WARNING SYSTEM                05BWH-01




AMBIENT TEMPERATURE SENSOR CIRCUIT

CIRCUIT DESCRIPTION
The vehicle equipped with the VSC system:
The thermistor assy (Ambient temperature sensor) takes in the information of the outside temperature and
sends it as a signal to the ECM. The ECM transmits the signal to the skid control ECU as a communication
signal. Depending on the changes of the outside temperature, the ECU controls the tire pressure warning
system.
HINT:
The signal sent from the thermistor assy (ambient temperature sensor) is used in the A/C.
WIRING DIAGRAM

    w/ VSC:



                                                                                      S3
         ECM                                                     J/C                  Brake Actuator Assy

                24                                          25          8
           ENG+ E4                    P                                        P           9
                                                            J4         J3                      ENG+




                   30                                       24          7
                                      V                                        V       23
           ENG-    E4                                       J4         J3                      ENG-




                                                                                                            F44437




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                   Author :           Date :                563
                                                                                                                     05-381
                                            DIAGNOSTICS       -     TIRE PRESSURE WARNING SYSTEM

INSPECTION PROCEDURE
      1      CHECK DIAGNOSTIC CODE OUTPUT

(a)       Check if the normal code is output by SFI system (See page 05-9 ).
          Standard:
          Normal code output.

          Result:
                        OK                                                               A
                        NG                                                               B

                                                        B           REPAIR CIRCUIT INDICATED BY OUTPUT
                                                                    CODE

      A

      2      CHECK HARNESS AND CONNECTOR(BRAKE ACTUATOR ASSY - ECM)

Brake Actuator Assy Wire Harness                  (a)       Disconnect the brake actuator assy and ECM E4 connec-
Side Connector:         S3 ENG+                             tors.
                                                  (b)       Measure the resistance between each terminal of brake
                                                            actuator assy and ECM wire harness side connectors.
                                                            Standard:
                                                                  Tester connection            Specified condition
                                                        S3-9 (ENG+) - E4-24 (ENG+)                   Below 1 
                                                        S3-23 (ENG-) - E4-30 (ENG-)                  Below 1 

                       ENG-                       NOTICE:
ECM Wire Harness Side Connector:                  As a water proof connector cannot be checked be from the
                                                  backside, check by connecting the sub-harness.
                                  ENG+            (c) Measure the resistance between each terminal brake ac-
                                                       tuator assy wire harness side connector and body
                                                       ground.
                                                       Standard:
                             E4                                   Tester connection            Specified condition
                                                         S3-9 (ENG+) - Body ground                 10 k or higher
                                                        S3-23 (ENG-) - Body ground                 10 k or higher
F45562
                             ENG-
F45165                                   F45563   NOTICE:
                                                  As a water proof connector cannot be checked be from the
                                                  backside, check by connecting the sub-harness.
                                                    NG              REPAIR OR           REPLACE       HARNESS          OR
                                                                    CONNECTOR

      OK




 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                             Author :        Date :                   564
05-382
                                             DIAGNOSTICS   -   TIRE PRESSURE WARNING SYSTEM

   3     INSPECT ECM(ENG+, ENG- OUTPUT)

                                                  (a)   Connect the brake actuator assy and ECM E4 connec-
                                                        tors.
                   E6          ENG+     E4        (b)   Remove the ECM with connectors being connected.
                                                  (c)   Turn the ignition switch ON.
                                                  (d)   Using an oscilloscope, connect the terminal between
                                                        E4-24 (ENG+) and E6-1 (E1) of the ECM harness side
                                                        connectors.
                        E1            ENG-
                                         A53769




         Normal Signal Waveform                   (e)   With the engine idling, check the output waveform.
                                                        Standard:
                                                        Signal waveform appears as shown in the illustration.
                                                  HINT:
                                                  As the vehicle speed becomes higher, the output waveform
                                                  cycle gets shorter.
                                         GND      (f)   Using an oscilloscope, connect the terminal between
 1 V / Division                                         E4-30 (ENG-) and E6-1 (E1) of the ECM harness side
                  0.5 ms / Division      F45157         connectors.


         Normal Signal Waveform                   (g)   With the engine idling, check the output waveform.
                                                        Standard:
                                                        Signal waveform appears as shown in the illustration.
                                                  HINT:
                                                  As the engine speed becomes higher, the waveform cycle gets
                                                  shorter.
                                         GND
 1 V / Division
                  0.5 ms / Division      F45158     NG         REPLACE ECM (See page 10-17 )

  OK

 REPLACE BRAKE ACTUATOR ASSY (See page 32-43 )




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                     Author :            Date :         565



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo