Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 20v15 citirepr

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
citirepr


>> Download citirepr documenatation <<

Text preview - extract from the document
                                                                                                        05-373
                                        DIAGNOSTICS    -     TIRE PRESSURE WARNING SYSTEM                   05BWF-02




TIRE PRESSURE WARNING LAMP CIRCUIT

CIRCUIT DESCRIPTION
When the tire pressure decreases, according to the signal from the skid control ECU, the tire pressure warn-
ing lamp in the combination meter assy comes on.
The tire pressure warning lamp also comes on when the tire pressure warning lamp signal becomes an open
circuit.
HINT:
Refer to the "TIRE PRESSURE WARNING LAMP CHART" section in the "PRE-CHECK" for the tire pressure
warning lamp (See page 05-347 ).
WIRING DIAGRAM




         C10
         Combination Meter Assy                                                       Brake Actuator Assy
           Tire Pressure                              J/C
                                              18                6                21 26
                                   6   GR-L                               GR-L
                                              J8                J7               S3 S3 WTIR
                                                                                 (*1) (*2)




                                   32 B-R
                                                   From Battery




                                                            *1: w/o VSC
                                                            *2: w/ VSC




                                                                                                             F44458




 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                     Author :          Date :               556
05-374
                                               DIAGNOSTICS        -   TIRE PRESSURE WARNING SYSTEM

INSPECTION PROCEDURE
      1      CONFIRM VEHICLE MODELS

(a)       Confirm the vehicle models.
          Result:
                      w/o VSC                                                            A
                       w/ VSC                                                            B

                                                           B          Go to step 4

      A

      2      INSPECT COMBINATION METER ASSY(TIRE PRESSURE WARNING LAMP)

                                                     (a)       Disconnect the combination meter connector.
                                (-)                  (b)       Connect the terminal 32 to batteries' positive (+) terminal,
                                                               and terminal 6 to batteries' negative (-) terminal of com-
                                                               bination meter assy, then check that the tire pressure
                                                               warning lamp comes on.
                                                               Standard:
                                                               Tire pressure warning lamp comes on.
                    (+)
                                            F45163
                                                       NG             REPLACE COMBINATION METER ASSY (See
                                                                      page 71-20 )

      OK

      3      CHECK HARNESS AND CONNECTOR(BRAKE ACTUATOR ASSY - COMBINATION
             METER ASSY)

                                                     (a)  Connect the combination meter assy connector.
Wire Harness Side:               WTIR (+)            (b)  Disconnect the brake actuator assy connector.
                                                     (c)  Turn the ignition switch ON.
                                                     (d)  Measure the voltage between the terminal 21 (WTIR) of
                                                          the brake actuator assy wire harness side connector and
                                                          the body ground when tire pressure warning lamp comes
                                                          on.
                                                          Standard:
                                            F44439        10 to 14 V
                                                     NOTICE:
                                                     As a water proof connector cannot be checked be from the
                                                     backside, check by connecting the sub-harness.
                                                       NG             REPAIR OR         REPLACE       HARNESS         OR
                                                                      CONNECTOR

      OK

  PROCEED TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOMS TABLE (See page
  05-364 )

 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                             Author :            Date :               557
                                                                                                         05-375
                                         DIAGNOSTICS   -   TIRE PRESSURE WARNING SYSTEM

  4     INSPECT COMBINATION METER ASSY(TIRE PRESSURE WARNING LAMP)

                                               (a)   Disconnect the combination meter connector.
                           (-)                 (b)   Connect the terminal 32 to batteries' positive (+) terminal,
                                                     and terminal 6 to batteries' negative (-) terminal of com-
                                                     bination meter assy, then check that the tire pressure
                                                     warning lamp comes on.
                                                     Standard:
                                                     Tire pressure warning lamp comes on.
                (+)
                                      F45163     NG        REPLACE COMBINATION METER ASSY (See
                                                           page 71-20 )

  OK

  5     CHECK HARNESS AND CONNECTOR(BRAKE ACTUATOR ASSY - COMBINATION
        METER ASSY)

                                               (a)  Connect the combination meter connector.
Wire Harness Side:        WTIR (+)
                                               (b)  Disconnect the brake actuator assy.
                                               (c)  Turn the ignition switch ON.
                                               (d)  Measure the voltage between the terminal 26 (WTIR) of
                                                    the brake actuator assy wire harness side connector and
                                                    the body ground when tire pressure warning lamp comes
                                                    on.
                                                    Standard:
                                      F45562        10 to 14 V
                                               NOTICE:
                                               As a water proof connector cannot be checked be from the
                                               backside, check by connecting the sub-harness.
                                                 NG        REPAIR OR         REPLACE           HARNESS      OR
                                                           CONNECTOR

  OK

 PROCEED TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOMS TABLE (See page
 05-364 )




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                 Author :             Date :               558



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo