Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 20vj6 cifulnot
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cifulnot documenatation <<
Text preview - extract from the document
05-1724
DIAGNOSTICS - POWER SLIDE DOOR SYSTEM 05BZG-02
POWER SLIDE DOOR DOES NOT FULLY OPEN (STOPS
OPERATION AT APPROX. 105 mm FROM FULLY OPEN POSITION)
CIRCUIT DESCRIPTION
S When the LH/RH rear window is open 105 mm (5.91 in.) or more, the slide door half-open stopper is
activated to force the slide door to stop at approximately 105 mm (5.91 in.) from the fully open position.
This is caused by the jam protection function between the slide door and vehicle body. A cable con-
nects the rear power window regulator and the slide door half-open stopper directly. When the rear
power window regulator operates until the opening reaches 150 mm (5.91 in.) or more, the rear power
window regulator transmits a signal to the half-open stopper through the cable and then the stop lever
is activated. This prevents the slide door from opening fully.
S When the power slide door main switch is turned OFF* while the slide door is operating, the slide door
stops operation.
* OFF is the position where the orange paint on the top of the switch does not appear
S Conditions that stop power slide door operation.
S Power slide door main switch is OFF
S DTCs B2223 or B2224 set
S Fuel lid open (only LH side)
S Touch sensor is open/short
S With ignition switch ON, shift lever is moved into any position except P position
INSPECTION PROCEDURE
1 CHECK REAR WINDOW POSITION
(a) Check that the rear window is fully open or the opening is less than 150 mm (5.91 in.) (the slide door
half-open stopper is inactive).
NG CHECK AND ADJUST SLIDE DOOR HALF OPEN
STOPPER AND CABLE (See page 75-19 )
OK
2 VISUALLY CHECK
(a) Check that there is no foreign object on the sliding area that the door is moving.
NG REMOVE CAUSE OF OBSTACLE AND
RE-CHECK SLIDE OPERATION
OK
3 CHECK OPERATION
(a) Check that the slide door fully opened by manual operation.
NG ADJUST FITTING CONDITION OF SLIDE DOOR
(See page 75-67 )
OK
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1907
05-1725
DIAGNOSTICS - POWER SLIDE DOOR SYSTEM
CHECK FOR DTC AND INSPECT POWER SLIDE DOOR SYSTEM (See pages 05-1650 and
75-19 )
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1908
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo