Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 21nfa cirse7
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cirse7 documenatation <<
Text preview - extract from the document
05-1457
DIAGNOSTICS - REAR SEAT ENTERTAINMENT SYSTEM 05BVE-02
QUALITY OF SOUND FROM WIRELESS HEADPHONE IS POOR OR
NO SOUND CAN BE HEARD
WIRING DIAGRAM
Multi-display
R25 Controller
Television Display Assy Sub-assy
(Shielded) 20
R27 SLD1
18
27 W
HPR- R27 HPR-
19
26 W
HPR+ R27 HPR+
16
29 W
HPL- R27 HPL-
17
28 W
HPL+ R27 HPL+
Radio Receiver Assy or
Radio and Navigation Assy
RSLD (*1) 14 14 (Shielded) 20 (Shielded) 27
SLD (*2, *3) R13 R9 IH3 R26 SG2
(*1) (*2, *3)
16 16 W 22 25
R-R- (*1) W
RSR- (*2, *3) R13 R9 IH3 R26 R-R-
(*1) (*2, *3)
15 15 21 26
R-R+ (*1) B W
RSR+ (*2, *3) R13 R9 IH3 R26 R-R+
(*1) (*2, *3)
18 18 24 23
R-L- (*1) G W
RSL- (*2, *3)
R13 R9 IH3 R26 R-L-
(*1) (*2, *3)
17 17 23 24
R-L+ (*1) R W
RSL+ (*2, *3)
R13 R9 IH3 R26 R-L+
(*1) (*2, *3)
20 20 7 J23 J/C 7
W-B W-B W-B
GND R15 R7 R5 IF2
(*1) (*2)
B B
(*3)
IF
*1: 10 Speaker w/ Navigation system
*2: 10 Speaker w/o Navigation system
*3: 6 Speaker
I35024
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1640
05-1458
DIAGNOSTICS - REAR SEAT ENTERTAINMENT SYSTEM
INSPECTION PROCEDURE
1 CHECK HARNESS AND CONNECTOR(RADIO RECEIVER ASSY - MULTI-DISPLA Y
CONTROLLER SUB-ASSY)
Radio Receiver Assy (a) Disconnect the radio receiver assy and multi-display con-
w/ Navigation system: troller sub-assy connectors.
(b) In order to check for an open circuit, measure the resis-
tance between the terminals, as shown in the chart.
Standard:
Tester connection Specified condition
R-R+ - R-R+ (*1) Below 1
R-R- - R-R- (*1) Below 1
R-L+ - R-L+ (*1) Below 1
RSLD R-L- - R-L- (*1) Below 1
R-L-
R-L+ R-R+ RSLD - SG2 (*1) Below 1
R-R-
w/o Navigation system (10 Speaker): RSR+ - R-R+ (*2, *3) Below 1
RSR- - R-R- (*2, *3) Below 1
RSL+ - R-L+ (*2, *3) Below 1
RSL- - R-L- (*2, *3) Below 1
SLD - SG2 (*2, *3) Below 1
SLD HINT:
S *1: w/ Navigation system
RSL- S *2: w/o Navigation system (10 speaker)
RSL+ S *3: w/o Navigation system (6 speaker)
RSR- RSR+
w/o Navigation system (6 Speaker): (c) In order to check for a short circuit, measure the resis-
tance between the terminals, as shown in the chart.
Standard:
Tester connection Specified condition
R-L- - Body ground 10 k or higher
R-L+ - Body ground 10 k or higher
SLD
R-R- - Body ground 10 k or higher
RSL- RSR+ R-R+ - Body ground 10 k or higher
I38660 RSL+ RSR- SG2 - Body ground 10 k or higher
I35959 I45601
Multi-display Controller Sub-assy:
R-L-
SG2 R-L+
R-R+ R-R- I35963
NG REPAIR OR REPLACE HARNESS OR
CONNECTOR
OK
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1641
05-1459
DIAGNOSTICS - REAR SEAT ENTERTAINMENT SYSTEM
2 INSPECT RADIO RECEIVER ASSY(R-R+, R-R-, R-L+, R-L-, RSR+, RSR-, RSL+,
RSL-, GND)
Radio Receiver Assy (a) In order to check for an open circuit, measure the resis-
w/ Navigation system: tance between the terminals according to the condition,
as shown in the chart.
Standard:
Tester connection Condition Specified condition
GND - Body ground Always Below 1
(b) Connect the radio receiver assy connector.
R-L- RSLD (c) Using an oscilloscope, check the signal waveform ac-
GND cording to the conditions, as shown in the chart.
R-L+ R-R- R-R+
w/o Navigation system (10 Speaker):
RSL- RSR-
RSL+ RSR+
GND
w/o Navigation system (6 Speaker):
RSL- RSR-
RSL+ RSR+
I38652 GND
I35958 I45602
Standard:
Tester connection Condition Specified condition
R-R+ - GND (*1) While voice sound is being produced A waveform synchronized with sound is output
R-R- - GND (*1) While voice sound is being produced A waveform synchronized with sound is output
R-L+ - GND (*1) While voice sound is being produced A waveform synchronized with sound is output
R-L- - GND (*1) While voice sound is being produced A waveform synchronized with sound is output
RSR+ - GND (*2, *3) While voice sound is being produced A waveform synchronized with sound is output
RSR- - GND (*2, *3) While voice sound is being produced A waveform synchronized with sound is output
RSL+ - GND (*2, *3) While voice sound is being produced A waveform synchronized with sound is output
RSL- - GND (*2, *3) While voice sound is being produced A waveform synchronized with sound is output
HINT:
S *1: w/ Navigation system
S *2: w/o Navigation system (10 speaker)
S *3: w/o Navigation system (6 speaker)
NG REPLACE RADIO RECEIVER ASSY
OK
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1642
05-1460
DIAGNOSTICS - REAR SEAT ENTERTAINMENT SYSTEM
3 CHECK HARNESS AND CONNECTOR(MULTI-DISPLA Y CONTROLLER
SUB-ASSY - TELEVISION DISPLAY ASSY)
(a) Disconnect the multi-display controller sub-assy and
Multi-display Controller Sub-assy:
television display assy connectors.
(b) In order to check for an open circuit, measure the resis-
tance between the terminals, as shown in the chart.
Standard:
HPL+ Tester connection Specified condition
SLD1 HPR+ - HPR+ Below 1
HPR- - HPR- Below 1
HPR+ HPL- HPL+ - HPL+ Below 1
HPR-
HPL- - HPL- Below 1
Television Display Assy:
(c) In order to check for a short circuit, measure the resis-
tance between the terminals, as shown in the chart.
Standard:
Tester connection Specified condition
HPR+ - Body ground 10 k or higher
HPR- - Body ground 10 k or higher
HPL+ - Body ground 10 k or higher
HPL- HPR+ HPL- - Body ground 10 k or higher
HPL+ HPR-
I35964
SLD1 - Body ground 10 k or higher
NG REPAIR OR REPLACE HARNESS OR
CONNECTOR
OK
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1643
05-1461
DIAGNOSTICS - REAR SEAT ENTERTAINMENT SYSTEM
4 INSPECT MULTI-DISPLA Y CONTROLLER SUB-ASSY(HPR+, HPR-, HPL+, HPL-,
SLD1)
Multi-display Controller Sub-assy: (a) Connect the multi-display controller sub-assy connector.
HPL+ (b) In order to check for an open circuit, measure the resis-
tance between the terminals according to the condition,
as shown in the chart.
Standard:
Tester connection Condition Specified condition
SLD1 HPL-
SLD1 - Body ground Always Below 1
HPR+ HPR-
(c) Using an oscilloscope, check the signal waveform ac-
I35265 cording to the conditions, as shown in the chart.
Standard:
Tester connection Condition Specified condition
HPR+ - SLD1 While voice sound is being produced A waveform synchronized with sound is output
HPR- - SLD1 While voice sound is being produced A waveform synchronized with sound is output
HPL+ - SLD1 While voice sound is being produced A waveform synchronized with sound is output
HPL- - SLD1 While voice sound is being produced A waveform synchronized with sound is output
NG REPLACE MULTI-DISPLA Y CONTROLLER
SUB-ASSY
OK
REPLACE TELEVISION DISPLAY ASSY
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1644
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo