
05-1387
DIAGNOSTICS - NAVIGATION SYSTEM 05NRK-01
SPEAKER CIRCUIT
CIRCUIT DESCRIPTION
The sound signal that has been amplified by the stereo component amplifier assy is sent to the speakers
from the stereo component amplifier assy through this circuit.
If there is a short in this circuit, the stereo component amplifier assy detects it and stops output to the speak-
ers. Thus sound cannot be heard from the speakers even if there is no malfunction in the stereo component
amplifier assy or speakers.
When a short is detected in the speaker circuit, no sound can be heard from the speakers.
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1570
05-1388
DIAGNOSTICS - NAVIGATION SYSTEM
WIRING DIAGRAM
Stereo Component W3 Woofer Box
Amplifier Assy Speaker Assy No.2
8 17
R-L R-L 1
WF2+ S10 IE1 WF+
19 18 3
W-L W-L
WF2- S10 IE1 WF-
9 8
L-Y L-Y 2
WF1+ S10 IE1 WF+
20 9 4
L-W L-W
WF1- S10 IE1 WF-
3
L-B 3
CTR+ S10
C6
Stereo Component
12 Speaker Assy
L-R 4
CTR- S10
6 2 3
P P 1 3 B P
FL+ S10 IF2 IA2
1
T8 Front No.2 F17 Front No.1
Speaker Assy LH Speaker Assy LH
17 6 4
FL- 2
S10 IF2 IA2
V V 2 4 Y V
7 1 17
LG LG 1 3 W LG
FR+ S10 IF2 IM1
1
T9 Front No.2 F18 Front No.1
Speaker Assy RH Speaker Assy RH
18 5 18
2
FR- S10 IF2 IM1
L L 2 4 R L
2 J22 J/C 10 T11 Woofer Box
W W W Speaker Assy
SUR+ S10 IE1
A A 1 No.1 LH
17
W W 1 T12
IH1
A Woofer Box
Speaker
18 Assy No.1
L L
IH1 RH
C 2
11 11 2
L L L
SUR- S10 IE1
C C
4 2 19 J/C 3
B B B R29
RL+ S10 IF1 J11 J12
1 Rear Speaker
13 6 20 4
Y Y Y 2 Assy LH
RL- S10 IF1 J11 J12
5 1 26 J/C 9
R R R
RR+ S10 IF1 J35 J36 R30
1
14 3 27 10 Rear Speaker
W W W 2 Assy RH
RR- S10 IF1 J35 J36
I45966
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1571
05-1389
DIAGNOSTICS - NAVIGATION SYSTEM
INSPECTION PROCEDURE
1 CHECK HARNESS AND CONNECTOR
Stereo Component Amplifier Assy (a) Disconnect the connectors shown in the illustration on the
Wire Harness View: left from the stereo component amplifier assy and speak-
FR+ CTR+
WF2+
ers.
FL+ RR+ RL+
(b) Measure the resistance between the front No.2 speaker
WF1+ assy and the stereo component amplifier assy to check
S10
for an open circuit in the wire harness.
SUR+
Standard: Below 1
SUR-
WF1- (c) Measure the resistance between the rear speaker assy
CTR-
WF2- FR- RR- RL- and the stereo component amplifier assy to check for an
FL- I42748
open circuit in the wire harness.
Front No.2 Speaker Assy Standard: Below 1
Stereo Component Speaker Assy (d) Measure the resistance between the stereo component
Connector Front View: speaker assy and the stereo component amplifier assy to
T8 check for an open circuit in the wire harness.
Standard: Below 1
T9
(e) Measure the resistance between the woofer box speaker
C6 assy No.2 and the stereo component amplifier assy to
check for an open circuit in the wire harness.
I38999 Standard: Below 1
(f) Measure the resistance between the front No.1 speaker
Front No.1 Speaker Assy assy and the front No.2 speaker assy to check for an open
Rear Speaker Assy circuit in the wire harness.
Connector Front View: Standard: Below 1
F17
(g) Measure the resistance between the woofer box speaker
F18 assy No.1 and the stereo component amplifier assy to
R29 check for an open circuit in the wire harness.
R30
Standard: Below 1
(h) Measure the resistance between each speaker and body
I38233 ground to check for a short circuit in the wire harness.
Standard: 10 k or higher
Woofer Box Speaker Assy No.2
Connector Front View:
W3
I34673
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1572
05-1390
DIAGNOSTICS - NAVIGATION SYSTEM
Woofer Box Speaker Assy No.1
Connector Front View:
T11
T12
I45967
NG REPAIR OR REPLACE HARNESS OR
CONNECTOR
OK
2 INSPECT WOOFER BOX SPEAKER ASSY NO.2
(a) Resistance check.
(1) Measure the resistance according to the value(s) in
the table below.
NOTICE:
The speaker should not be removed for checking.
Standard:
Tester connection Condition Specified condition
1-3 Always Approximately 1.21
I34673 2-4 Always Approximately 1.21
NG REPLACE WOOFER BOX SPEAKER ASSY NO.2
(SEE PAGE 67-16 )
OK
3 INSPECT FRONT NO.1 SPEAKER ASSY
(a) Resistance check.
(1) Measure the resistance between the terminals of the speaker.
Standard: 4 to 6
NG REPLACE FRONT NO.1 SPEAKER ASSY
(SEE PAGE 67-1 1)
OK
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1573
05-1391
DIAGNOSTICS - NAVIGATION SYSTEM
4 INSPECT FRONT NO.2 SPEAKER ASSY
(a) Check that the malfunction disappears when another speaker in good condition is installed.
OK: Malfunction disappears.
HINT:
S Connect all the connectors to the speakers.
S When there is a possibility that either right or left front speaker is defective, inspect by interchanging
the right one with the left one.
OK REPLACE FRONT NO.2 SPEAKER ASSY
(SEE PAGE 67-12 )
NG
5 INSPECT REAR SPEAKER ASSY
(a) Resistance check.
(1) Measure the resistance between the terminals of the speaker.
Standard: Approximately 2.4
NG REPLACE REAR SPEAKER ASSY
(SEE PAGE 67-14 )
OK
6 INSPECT WOOFER BOX SPEAKER ASSY NO.1
(a) Check that the malfunction disappears when another speaker in good condition is installed.
OK: Malfunction disappears.
HINT:
S Connect all the connectors to the speakers.
S When there is a possibility that either right or left rear speaker is defective, inspect by interchanging
the right one with the left one.
OK REPLACE WOOFER BOX SPEAKER ASSY NO.1
(SEE PAGE 67-15 )
NG
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1574
05-1392
DIAGNOSTICS - NAVIGATION SYSTEM
7 INSPECT STEREO COMPONENT SPEAKER ASSY
(a) Check that the malfunction disappears when another speaker in good condition is installed.
OK: Malfunction disappears.
HINT:
S Connect all the connectors to the speakers.
S When there is a possibility that either right or left front speaker is defective, inspect by interchanging
the right one with the left one.
OK REPLACE STEREO COMPONENT SPEAKER
ASSY (SEE PAGE 67-13 )
NG
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
(SEE PAGE 05-1286 )
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1575