Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 21pl9 ciavn10
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ciavn10 documenatation <<Text preview - extract from the document05-1320
DIAGNOSTICS - NAVIGATION SYSTEM 05FGT-04
RADIO BROADCAST CANNOT BE RECEIVED (POOR RECEPTION)
INSPECTION PROCEDURE
1 CHECK RADIO AND NAVIGATION ASSY
(a) Check the radio's automatic search function.
(1) Check that the radio's automatic station search function works properly.
OK: The radio's automatic station search function works properly.
OK REPLACE RADIO AND NAVIGATION ASSY
(SEE PAGE 67-9 )
NG
2 CHECK OPTIONAL COMPONENTS
(a) Check for optional components (sun-shade film, telephone antenna, etc.).
(1) Check if optional components, such as sun-shade film or telephone antenna that may decrease
reception sensitivity, are installed.
OK: Optional components are installed.
OK REMOVE OPTIONAL COMPONENTS AND
CHECK AGAIN
NG
3 CHECK ANTENNA
(a) Check the antenna for noise.
(1) Turn the ignition switch to the ACC position, turn the radio on, and put the radio into AM mode.
Bring the tip of a screwdriver into contact with the antenna assy and check that noise can be heard
from the speakers.
OK: Noise occurs.
OK REPAIR ANTENNA ASSY(SEE PAGE 67-40 )
NG
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1503
05-1321
DIAGNOSTICS - NAVIGATION SYSTEM
4 CHECK RADIO AND NAVIGATION ASSY
(a) Preparation for check
(1) Remove the antenna plug from the radio and navi-
gation assy.
(b) Check for noise
(1) Turn the ignition switch to the ACC position with the
radio and navigation assy connector connected.
(2) Turn the radio on and select AM mode.
(3) Bring a screwdriver, thin wire, or other metal object
E50367 into contact with the radio receiver's antenna jack.
Check that noise can be heard from the speakers.
OK: Noise occurs.
NG REPLACE RADIO AND NAVIGATION ASSY
(SEE PAGE 67-9 )
OK
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
(SEE PAGE 05-1286 )
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1504
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo