Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 21pl9 ciavn55

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
ciavn55


>> Download ciavn55 documenatation <<

Text preview - extract from the document
                                                                                                                           05-1379
                                         DIAGNOSTICS       -    NAVIGATION SYSTEM                                              05NRI-01




AVC-LAN CIRCUIT (RADIO AND NAVIGATION ASSY -
MULTI-DISPLA Y CONTROLLER SUB-ASSY)

CIRCUIT DESCRIPTION
Each unit of the radio and navigation system connected to the AVC-LAN (communication bus) communi-
cates by transferring the signals from each switch.
When a short to +B or short to ground occurs in this AVC-LAN, the radio and navigation system will not func-
tion normally as communication is discontinued.
In the AVC-LAN, the radio and navigation assy becomes the communication master and has enough resis-
tance necessary for communication.
WIRING DIAGRAM


        Multi-display                                                                                  Radio and
        Controller Sub-assy                                                                            Navigation Assy

                         17                               16                                     9
                                        LG                                      P
                   TX3+ R26                               IH3                                  R14 TXM+



                          18                              17                                     10
                                        W                                       V
                   TX3- R26                               IH3                                  R14 TXM-



                                                                                                                                 I45178



INSPECTION PROCEDURE
   1       INSPECT RADIO AND NAVIGATION ASSY

 Wire Harness View:                             (a)     Disconnect the radio and navigation assy connector R14.
                                                (b)     Measure the resistance according to the value(s) in the
                                                        table below.
             R14                                        Standard:
                                                      Tester connection              Condition                 Specified condition
                                                       TXM+ - TXM-                    Always                       60 to 80 




    TXM-           TXM+                I39065
                                                  NG            REPLACE RADIO AND NAVIGATION ASSY
                                                                (SEE PAGE 67-9 )

   OK




 2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                          Author :                    Date :                   1562
05-1380
                                         DIAGNOSTICS       -   NAVIGATION SYSTEM

   2      CHECK HARNESS AND CONNECTOR(RADIO AND NAVIGATION ASSY - MULTI-
          DISPLAY CONTROLLER SUB-ASSY)

 Radio and Navigation Assy                     (a)     Disconnect the radio and navigation assy connector R14
 Wire Harness View:                                    and multi-display controller sub-assy connector R26.
                                               (b)     Measure the resistance according to the value(s) in the
                                                       table below.
                 R14                                   Standard:
                                                     Tester connection              Condition            Specified condition
                                                      TXM+ - TX3+                    Always                  Below 1 
                                                      TXM- - TX3-                    Always                  Below 1 
          TXM-         TXM+           I38655     TXM+ - Body ground                  Always               10 k or higher
                                                 TXM- - Body ground                  Always               10 k or higher

 Multi-display Controller Sub-assy
 Wire Harness View:
        R26




                    TX3+                         NG            REPAIR OR              REPLACE        HARNESS               OR
                    TX3-              I34639                   CONNECTOR

   OK

  PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN DIAGNOSTIC TROUBLE CODE CHART
  (SEE PAGE 05-1278 )




2005 SIENNA REPAIR MANUAL (RM1163U)

                                                                         Author :               Date :                     1563



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo