Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 21pl9 ciavn56
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ciavn56 documenatation <<
Text preview - extract from the document
05-1395
DIAGNOSTICS - NAVIGATION SYSTEM 05NRM-01
RSE SOUND SIGNAL CIRCUIT (MULTI-DISPLA Y CONTROLLER
SUB-ASSY - RADIO AND NAVIGATION ASSY)
CIRCUIT DESCRIPTION
The multi-display controller sub-assy sends a sound signal to the radio and navigation assy through this
circuit.
The sound signal that has been sent is amplified by the stereo component amplifier assy, and then sent to
the speakers.
If there is an open or short in the circuit, sound cannot be heard from the speakers even if there is no malfunc-
tion in the stereo component amplifier assy or speakers.
WIRING DIAGRAM
Multi-display Radio and
Controller Sub-assy Navigation Assy
11 8 1
(Shielded) (Shielded)
SG1 R26 IH3 R14 CSLD
9 10 3
W W
R- R26 IH3 R14 CDR-
10 9 2
W B
R+ R26 IH3 R14 CDR+
7 12 5
W G
L- R26 IH3 R14 CDL-
8 11 4
W R
L+ R26 IH3 R14 CDL+
I35606
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1578
05-1396
DIAGNOSTICS - NAVIGATION SYSTEM
INSPECTION PROCEDURE
1 CHECK HARNESS AND CONNECTOR(RADIO AND NAVIGATION ASSY - MULTI-
DISPLAY CONTROLLER SUB-ASSY)
Radio and Navigation Assy (a) Disconnect the radio and navigation assy connector R14
Wire Harness View: and multi-display controller sub-assy connector R26.
(b) Measure the resistance according to the value(s) in the
table below.
R14 Standard:
Tester connection Specified condition
CSLD
CDR- - R- Below 1
CDR+ - R+ Below 1
CDL- CDL+ CDR- CDR+ CDL- - L- Below 1
I38655
CDL+ - L+ Below 1
CSLD - SG1 Below 1
Multi-display Controller Sub-Assy
CDR- - Body ground 10 k or higher
Wire Harness View:
CDR+ - Body ground 10 k or higher
R26
CDL- - Body ground 10 k or higher
CDL+ - Body ground 10 k or higher
CSLD - Body ground 10 k or higher
SG1
L-
R+ L+ NG REPAIR OR REPLACE HARNESS OR
R- I34639
CONNECTOR
OK
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
(SEE PAGE 05-1286 )
2005 SIENNA REPAIR MANUAL (RM1163U)
Author : Date : 1579
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo