Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Sienna 2004-2007 Approved SRM 04 05 21pl9 cidiagdd

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download cidiagdd documenatation <<

Text preview - extract from the document

05-1303
DIAGNOSTICS - NAVIGATION SYSTEM
05FHU-04

DIAGNOSIS DISPLAY DETAILED DESCRIPTION
HINT:
S This section contains a detailed description of displays within diagnostic mode.
S Illustrations may differ from the actual vehicle depending on the device settings and options. There-
fore, some detailed areas may not be shown exactly the same as on the actual vehicle.
1. System Check
(a) System Check Mode Screen

*1 *2 *1 *3 *2 *4 I38587

Device Names and Hardware Address/*1
HINT:
S Registered device names are displayed.
S If a device name is unknown to the system, its physical address is shown instead.
Address No. Name Address No. Name
110 EMV 120 AVX
128 1DIN TV 140 AVN
144 G-BOOK 178 NAVI
17C MONET 190 AUDIO H/U
1AC CAMERA-C 1B0 Rr-TV
1C0 Rr-CONT 1C2 TV-TUNER2
1C4 PANEL 1C6 G/W
1C8 FM-M-LCD 1D8 CONT-SW
1EC Body 1F0 RADIO TUNER
1F1 XM 1F2 SIRIUS
230 TV-TUNER 240 CD-CH2
250 DVD-CH 280 CAMERA
360 CD-CH1 3A0 MD-CH
17D TEL 440 DSP-AMP
530 ETC 5C8 MAYDAY
1A0 DVD-P 1D6 CLOCK
1F4 RSA 1F6 RSE
480 AMP - -

2005 SIENNA REPAIR MANUAL (RM1163U)

Author : Date : 1486
05-1304
DIAGNOSTICS - NAVIGATION SYSTEM

Check Result/*2
HINT:
Result codes for all devices are displayed.
Result Meaning Action
The device did not respond with a DTC (excluding commu-
OK -
nication DTCs from the AVC-LAN).
Look up the DTC in "Unit Check Mode" and replace the de-
EXCH The device responds with a "replace"-type DTC.
vice.
CHEK The device responds with a "check"-type DTC. Look up the DTC in "Unit Check Mode".
The device was previously present, but does not respond in 1. Check power supply wire harness of the device.
NCON
diagnostic mode. 2. Check the AVC-LAN of the device.
Old The device responds with an "old"-type DTC. Look up the DTC in "Unit Check Mode".
The device responds in diagnostic mode, but gives no DTC 1. Check power supply wire harness of the device.
NRES
information. 2. Check the AVC-LAN of the device.

Code Clear/*3
Present DTCs are cleared.
Memory Clear/*4
Present and past DTCs and registered connected device names are cleared.
(b) Diagnosis MENU Screen

I38666

HINT:
Each item is grayed out or not displayed based on the device settings.

2005 SIENNA REPAIR MANUAL (RM1163U)

Author : Date : 1487
05-1305
DIAGNOSTICS - NAVIGATION SYSTEM

*5 *6

*2 *3 *4 I38588

Screen Description
Display Contents
Device name/*1 Target device
Segment/*2 Target device logical address
DTC/*3 DTC (Diagnostic Trouble Code)
The time and date of past DTCs are displayed. (The year is displayed in 2 digit
Timestamp/*4
format.)
Present Code/*5 The DTC output at the service check is displayed.
Past Code/*6 Diagnostic memory results and recorded DTCs are displayed.

(d) LAN Monitor (Original) Screen

I38589

Check result/*1
HINT:
Check results of all the devices are displayed.
Result Meaning Action
No Err
There are no communication DTCs. -
(OK)
CHEK The device responds with a "check"-type DTC. Look up the DTC in "Unit Check Mode".
The device was previously present, but does not respond in 1. Check power supply wire harness of the device.
NCON
diagnostic mode. 2. Check the AVC-LAN of the device.
Old The device responds with an "old"-type DTC. Look up the DTC in "Unit Check Mode".
Device responds in diagnostic mode, but gives no DTC 1. Check power supply wire harness of the device.
NRES
information. 2. Check the AVC-LAN of the device.

2005 SIENNA REPAIR MANUAL (RM1163U)

Author : Date : 1488
05-1306
DIAGNOSTICS - NAVIGATION SYSTEM

(e) LAN Monitor (Individual) Screen

*2
*3 *4 *5 *6 I38590

Screen Description
Display Contents
Device name/*1 Target device
Segment/*2 Target logical address
DTC/*3 DTC (Diagnostic Trouble Code)
Sub-code (device address)/*4 Physical address stored with DTC. (If there is no address, nothing is displayed.)
Connection check No./*5 Connection check number stored with DTC.
DTC occurrence/*6 Number of times the same DTC has been recorded.

2. DISPLAY CHECK
(a) Vehicle Signal Check Mode Screen

I38591

Screen Description
Name Contents
Battery Battery voltage is displayed.
PKB Parking brake ON/OFF state is displayed.
REV Reverse signal ON/OFF state is displayed.
IG IG switch ON/OFF state is displayed.
ADIM/TCAN Brightness state DIM (with)/ BRIGHT (without) is displayed.
SPEED Vehicle speed is displayed in km/h.
TAIL TAIL signal (Head lamp dimmer switch) ON/OFF state is displayed.

HINT:
S Only items sending a vehicle signal will be displayed.
S This screen is updated once per second when input signals to the vehicle are changed.

2005 SIENNA REPAIR MANUAL (RM1163U)

Author : Date : 1489
05-1307
DIAGNOSTICS - NAVIGATION SYSTEM

3. NAVIGATION CHECK
(a) Navigation Check Screen

I38667

HINT:
Each item is grayed out or not displayed based on the device settings.
(b) GPS Information Screen

*1 *1
*2
*2

*5
*3

*4 I38592

Satellite information/*1
Information from a maximum of 12 satellites is displayed on the screen. This information includes the target
GPS satellite number, elevation angle, direction and signal level.
Receiving condition/*2
(DENSO model)
Display Contents
T The system is receiving a GPS signal, but is not using it for location.
P The system is using the GPS signal for location.
- The system cannot receive a GPS signal.
(AISIN AW model)
Display Contents
01H The system cannot receive a GPS signal.
02H The system is tracing a satellite.
03H The system is receiving a GPS signal, but is not using it for location.
04H The system is using the GPS signal for location.
Measurement information/*3
Display Contents
2D 2-dimensional location method is being used.
3D 3-dimensional location method is being used.
NG Location data cannot be used.
Error Reception error has occurred.
- Any other state.

2005 SIENNA REPAIR MANUAL (RM1163U)

Author : Date : 1490
05-1308
DIAGNOSTICS - NAVIGATION SYSTEM

Position information/*4
Display Contents
Position Latitude and longitude information on the current position is displayed.
Date information/*5
Display Contents
The date/time information obtained from GPS signal is displayed in Greenwich
Date
mean time (GMT). The last 4 digits are displayed.

*1
*2

I38593

Vehicle signal
Display Contents
REV/*1 REV signal ON/OFF state is displayed.
SPD/*2 SPD signal condition is displayed.

Sensor signal
Display Contents
Gyro sensor output condition is displayed (when the vehicle runs straight or is sta-
Gyro sensor/*3
tionary, the voltage is approximately 2.5 V).

HINT:
Signals are updated once per second only when vehicle sensor signals are changed.
(d) Parts Information Screen

*1
*2
*3
*4

I38594

Screen description
Display Contents
Navigation Manufacturer/*1 Radio and navigation assy manufacturer is displayed.
Navigation Version No./*2 Radio and navigation assy version is displayed.
Disc Manufacturer/*3 Map disc manufacturer is displayed.
Disc Version No./*4 Map disc version is displayed.

2005 SIENNA REPAIR MANUAL (RM1163U)

Author : Date : 1491
05-1309
DIAGNOSTICS - NAVIGATION SYSTEM

(e) Memory Copy/Paste Screen

I38595

HINT:
This function cannot be used.

2005 SIENNA REPAIR MANUAL (RM1163U)

Author : Date : 1492

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo